this post was submitted on 13 Oct 2024
472 points (97.8% liked)
Asklemmy
43885 readers
847 users here now
A loosely moderated place to ask open-ended questions
Search asklemmy π
If your post meets the following criteria, it's welcome here!
- Open-ended question
- Not offensive: at this point, we do not have the bandwidth to moderate overtly political discussions. Assume best intent and be excellent to each other.
- Not regarding using or support for Lemmy: context, see the list of support communities and tools for finding communities below
- Not ad nauseam inducing: please make sure it is a question that would be new to most members
- An actual topic of discussion
Looking for support?
Looking for a community?
~Icon~ ~by~ ~@Double_[email protected]~
founded 5 years ago
MODERATORS
A nice thought until you run into a left handed thread........
It's works most of them time unless you're in a specialty trade making spindle, gears, and such that must be threaded backwards to avoid the wheel undoing itself.
Or you work with gas cylinders.
I don't understand this one, please Airgas
Reverse threads on gas cylinders are (as far as I know) only used for flammables.
I was sure there was a reason, I just never worked in the field long enough to learn or ask why
Thanks π«‘
They're made that way so you don't accidentally connect a gas cylinder to a water line.
Fucking facists keeping me from tap en flambΓ©; like they know what is safe.
I heard from a gas guy that this is to ensure that only connectors made for gas usage are used and people don't build crazy contraptions with plumber gear for flammable gases.... Kinda makes sense.
Yep, 80% of the time it works every time!
The point is, if you fix things, you WILL run into left handed threads at some point. I've found them in washers, vacuums, blenders, bikes, and cars. Left handed threads aren't the most common thing, but they are out there waiting to screw with your mind and ruin your day.......
Or when you're screwing in a screw from behind/under something while lying upside down using a ratchet with an angled extender and you aren't sure which way is actually left/right where the screw is.
Got that tee shirt too!
And you feel so incredibly dense every time you run into it and you can't figure out what's going on. The crank on my kids bike was out of whack the other week and I kept tightening it down and it kept coming back loose. I was turning the crank one way to tighten it which was pushing it against the lock nut but it needed to turn the other way to be pushed against the bearing before I tighten the lock nut down. If it was all right-handed it would have been clear what I was doing.
... and you hope you don't forget until the next time you have to do it...
Spindles and shafting are places you can find left handed threads. And it depends on the direction of rotation like that bike crank. Can't have things coming lose due to the way bike cranks turn, so they a left handed thread to stay tight.
It took me a long to time learn that when dealing with such things that I need to stop, look, and think about how things are assembled and why.