Videos

14365 readers

209 users here now

For sharing interesting videos from around the Web!

Rules

Videos only
Follow the global Mastodon.World rules and the Lemmy.World TOS while posting and commenting.
Don't be a jerk
No advertising
No political videos, post those to [email protected] instead.
Avoid clickbait titles. (Tip: Use dearrow)
Link directly to the video source and not for example an embedded video in an article or tracked sharing link.
Duplicate posts may be removed

Note: bans may apply to both [email protected] and [email protected]

founded 2 years ago

MODERATORS

241

[Technology Connections] Thermoelectric cooling: it's not great. (www.youtube.com)

submitted 2 months ago by [email protected] to c/videos

37 comments fedilink hide all child comments

you are viewing a single comment's thread
view the rest of the comments

[–] [email protected] 5 points 2 months ago* (last edited 2 months ago)

aren’t you still limited by ambient air temp because the hot side of the Peltier needs to be cooled by air anyway?

You can certainly get subambient. Put some electrical current through a Peltier and one side gets cold, and the other side gets hot. Use the cold side to cool your components, and get the heat away from the hot side, and you can make it work.

It can be a bit tricky. The hot side is right next to the cold side and it gets really hot, so if you can't get the heat away it'll leak right back over. Peltiers use a lot of power so you need a beefy power supply, and that'll be another source of heat. Assuming you can figure that all out, you also have to be careful that the cold side doesn't get too cold or you get condensation. Electrical components tend to not like moisture very much.

I remember people experimented around with it back in early-mid 2000's. General consensus nowadays seems to be is that it's not terribly effective or practical and not worth the trouble.