this post was submitted on 22 Sep 2024
241 points (97.3% liked)

Videos

14365 readers
209 users here now

For sharing interesting videos from around the Web!

Rules

  1. Videos only
  2. Follow the global Mastodon.World rules and the Lemmy.World TOS while posting and commenting.
  3. Don't be a jerk
  4. No advertising
  5. No political videos, post those to [email protected] instead.
  6. Avoid clickbait titles. (Tip: Use dearrow)
  7. Link directly to the video source and not for example an embedded video in an article or tracked sharing link.
  8. Duplicate posts may be removed

Note: bans may apply to both [email protected] and [email protected]

founded 2 years ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
[–] acosmichippo 6 points 2 months ago* (last edited 2 months ago) (3 children)

Overclockers attempting (often in vain) to use them for sub-ambient-temperature cooling for computer components have known this for a long time.

aren't you still limited by ambient air temp because the hot side of the Peltier needs to be cooled by air anyway?

I have a Peltier based car cooler, and that’s basically the only use case for these things that makes sense:

I don't really even see the point of that to be honest. if we're talking short periods anyway, a nicely insulated cooler with ice packs (cooled by a heat-pump freezers) is way better imo.

[–] [email protected] 8 points 2 months ago* (last edited 2 months ago)

aren't you still limited by ambient air temp because the hot side of the Peltier needs to be cooled by air anyway?

No, that's why the baby fridge works. The peltier TEC in the fridge can produce temperatures below ambient, but generally not below freezing. Computer chip TEC coolers would go farther and push more power through the TEC and do things like water-cooling the hot side instead of a little fan.

The reason they don't get used anymore more complicated. It's my understanding that basically TECs have a sort of limit on the amount of heat they can push from the cold side to the hot side, because moving more heat means more energy used and thus more waste heat. Apparently most modern chips are past that limit. IIRC, TECs can only move something like 100w of heat - past that and they start to heat themselves up because of waste heat. Modern chips can be like 300w.

Sub ambient cooling also comes with a bunch of issues like condensation, so no one really uses it day to day. Also, chips are run so close to their limits now that cooling like that doesn't get you nearly the performance difference it once did.

[–] [email protected] 5 points 2 months ago* (last edited 2 months ago)

aren’t you still limited by ambient air temp because the hot side of the Peltier needs to be cooled by air anyway?

You can certainly get subambient. Put some electrical current through a Peltier and one side gets cold, and the other side gets hot. Use the cold side to cool your components, and get the heat away from the hot side, and you can make it work.

It can be a bit tricky. The hot side is right next to the cold side and it gets really hot, so if you can't get the heat away it'll leak right back over. Peltiers use a lot of power so you need a beefy power supply, and that'll be another source of heat. Assuming you can figure that all out, you also have to be careful that the cold side doesn't get too cold or you get condensation. Electrical components tend to not like moisture very much.

I remember people experimented around with it back in early-mid 2000's. General consensus nowadays seems to be is that it's not terribly effective or practical and not worth the trouble.

[–] shalafi 2 points 2 months ago

Planing a cooler presentation when I get my Redneck Business channel going. I'm stunned by how ignorant people are on the subject. My $100 Lifetime cooler keeps cold exactly as long as a $500 RTIC or Yeti. And those are only for if you need multiple days of cool. I have a dozen coolers for various needs, and most are Igloos I got from the thrift.