homeassistant

12130 readers

39 users here now

Home Assistant is open source home automation that puts local control and privacy first. Powered by a worldwide community of tinkerers and DIY enthusiasts. Perfect to run on a Raspberry Pi or a local server. Available for free at home-assistant.io

founded 2 years ago

MODERATORS

[email protected]

What device can rotate a knob and works with HA? (feddit.it)

submitted 2 months ago by [email protected] to c/homeassistant

39 comments fedilink hide all child comments

I was accidentally locked out of home again, and I had to call a professional to open the lock.

But if someone was home, they could have just turned the knob of the door from inside. There's a device that can do that? It needs to do 3 full turns and it requires a bit of force to do that (armored door with iron bars that slide in every direction, so it has a big inertia to start)

I saw a ready solution on a store, the iseo x1r, but that costs 1000 euro + another 200 for the gateway (not mandatory but otherwise it uses proprietary Bluetooth protocol and so it can't talk with HA

you are viewing a single comment's thread
view the rest of the comments

[–] [email protected] 1 points 2 months ago (1 children)

https://www.switch-bot.com/products/switchbot-lock

Not sure if it's compatible with your particular lock, but I've got switchbot stuff integrated into home assistant without issue (using their hub).

[–] [email protected] 2 points 2 months ago (1 children)

Nice this looks compatibile, except for the open sensor, my door has an ultra thick frame and it's only possible to install it at 12 cm, while the guide says 4 cm max. Does it really need it?

[–] JaddedFauceet 1 points 2 months ago* (last edited 2 months ago)

It is used to detect closing of door and lock the door once it is closed. You may need it during the initial setup. as long as it can be placed close to the door lock, it should work ok.

otherwise, once integrated with HA, you can probably use your own contact sensor and trigger door lock using HA

btw, i am using ESPHome bluetooth proxy with Switchbot