this post was submitted on 24 Jul 2024
243 points (98.4% liked)

Technology

59995 readers
2532 users here now

This is a most excellent place for technology news and articles.


Our Rules


  1. Follow the lemmy.world rules.
  2. Only tech related content.
  3. Be excellent to each another!
  4. Mod approved content bots can post up to 10 articles per day.
  5. Threads asking for personal tech support may be deleted.
  6. Politics threads may be removed.
  7. No memes allowed as posts, OK to post as comments.
  8. Only approved bots from the list below, to ask if your bot can be added please contact us.
  9. Check for duplicates before posting, duplicates may be removed

Approved Bots


founded 2 years ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
[–] [email protected] -1 points 4 months ago* (last edited 4 months ago) (4 children)

How would these be causing crashes? The ID.4 has a few cruise control buttons on the left side of the steering wheel. They are push buttons, but you can swipe the speed up or down to change it to the next 5 MPH. The resume button is not capacitive as the article states, you have to push it. Once again, this seems like people not wanting to take responsibility for their own lack of attention while driving and blaming it on the tech in the vehicle.

[–] [email protected] 22 points 4 months ago (2 children)

Wait a minute. There are SWIPE CONTROLS on the steering wheel that adjust the cruise control speed by 5 mph increments? And we don't think that's problematic? I'm either misunderstanding the controls or not sure how that seems like a good idea at all

[–] Lulzagna 6 points 4 months ago

Ya, even my Jettas physical buttons only increase the speed by 2km

[–] [email protected] 10 points 4 months ago (1 children)

I mean they literally were talking about multiple ways. Someone could hit a stereo control and spike volume while turning the wheel which causes a huge break in concentration leading to an accident. That is absolutely possible and could be extremely dangerous in the right situation.

[–] [email protected] 2 points 4 months ago (1 children)

I've got a ID4 and they are all capacitive buttons. It makes a tactile vibration when engaged.

I hate my car. Nice to drive, but awful to use.

[–] [email protected] 1 points 4 months ago

I have one too. The only part of the cruise control system that is capacitive is the speed up and down. Love it.

[–] Zron 1 points 4 months ago (2 children)

According to the article there is a “resume” button for the cruise control.

No idea because I don’t own one of these, but if it’s true that’s insane.

I’ve driven a lot of cars from a lot of different manufacturers, and have never encountered a resume button that works how the article describes, where it will accelerate you to whatever the last cruise control speed was.

[–] [email protected] 4 points 4 months ago* (last edited 4 months ago) (1 children)

that works how the article describes, where it will accelerate you to whatever the last cruise control speed was.

That's what the resume function does normally?

That is:

  • You switch on and activate cruise control
  • You've tripped it while active by pressing the brake

At this point cruise control is still "hot" and pressing resume will turn the cruise control back on, usually with a speed interlock so you can't activate it at a dead stop.

If the car has "one pedal driving" then inadvertent activation could be pretty surprising, and would require you to lift your foot off the accelerator and hit the brakes. Coupled with the rocket-ship acceleration of most EVs this could easily cause an accident I guess.

[–] Zron -1 points 4 months ago (1 children)

Never been in a car with such a feature, as it seems inherently dangerous to me.

Every car I’ve been in, when you accidentally disengage the cruise, you just hit cruise again and it re-engages at whatever speed you slowed down to, then you adjust back to what you want.

Having the car suddenly accelerate without deliberate input just doesn’t seem wise.

[–] [email protected] 3 points 4 months ago* (last edited 4 months ago) (1 children)

Can confirm, my car has the following cruise control buttons:

On/off - res/+

Cancel - set/-

The on/off button arms or disarms cruise control entirely. With it armed and no speed set, set/+ will set the current speed as the target speed. With no speed set, the only other button that does anything is the on/off button, which disarms the system.

With a speed set:

On/off will still complete disarm the system

Cancel will remove the set speed, but keep the system armed

Tapping the brake will pause the cruise control

Res/+ will increment the speed by one mph, or resume cruise at the previous set speed if cruise has been paused

Set/- will decrement the mph by 1, or if held pause the cruise control until it's released.

One of set or resume will set the current travel speed as the new cruise speed, if travel speed is higher than cruise. I think it's res.

For the most part this works fine. I don't use the resume function, like you said it can be a bit harrowing if you're not certain exactly what speed is set, and my car is over a decade old - it doesn't have that feature. But, critically, it's not a fucking CAPACITIVE BUTTON, and I've never accidentally hit it once.

[–] [email protected] 2 points 4 months ago* (last edited 4 months ago)

But, critically, it's not a fucking CAPACITIVE BUTTON, and I've never accidentally hit it once.

Yeah. I use resume a fair bit because you can set it to the speed you want and if your cruising gets interrupted by a slow truck, or roadworks, or by passing through a town, you can just press it and the car will accelerate back up to the set speed. Not like a rocket, maybe a couple of km/hr per second.

But still, like you say, easily-triggered capacitive buttons for critical functions, holy shit that is a bad idea.

[–] [email protected] 2 points 4 months ago

That's how every cruise system I've ever used works.