this post was submitted on 19 Sep 2023
14 points (81.8% liked)

homeassistant

12291 readers
46 users here now

Home Assistant is open source home automation that puts local control and privacy first. Powered by a worldwide community of tinkerers and DIY enthusiasts. Perfect to run on a Raspberry Pi or a local server. Available for free at home-assistant.io

founded 2 years ago
MODERATORS
 

Would anyone recomment an IP #camera that will work purely locally, with no cloud etc connections, available in EU (PL)? Most likely will be inside, though ones able to survive outdoors are appreciated as well. Ideally to be connected with #HomeAssistant and/or #Frigate (once I get around to setting that up 😅 ) #HomeAutomation
@[email protected] @[email protected]

all 16 comments
sorted by: hot top controversial new old
[–] TheDevil 8 points 1 year ago* (last edited 1 year ago) (1 children)

A second vote for Reolink. They’re entirely adequate for most home scenarios.

Dahua are also very good if you can find them however they are aimed at professional installers. They cover almost every scenario imaginable and have good on device ai features. They do have their idiosyncrasies but do everything you could need and offer excellent lowlight performance for very little cost. There is also a very good home assistant integration.

You’ll find a lot of people tend to chose between Dahua and the more expensive Hikvision on cctvforums. You should be able to pick up a capable 4mp Dahua with tripwire detection for 60GBP. These cameras can (sometimes literally) see in the dark.

Avoid ESP32 Cams. They are very low frame rate and produce a very noisy image. They’re fun to tinker with but are nowhere near the quality of a real IPC.

[–] [email protected] 1 points 1 year ago

Amrest = Rebranded Dahua mostly, they're not much more money than Reolink too.

[–] [email protected] 7 points 1 year ago (1 children)

@viq @[email protected] @[email protected] I’ve been quite pleased with Reolink cameras, which can work entirely locally (although be sure to check the home assistant documentation for the list of cameras that work—many but not all models are usable with HA). Personally I have multiple E1 Zooms and WiFi Doorbell cams, all operating fully locally.

[–] [email protected] 0 points 1 year ago
[–] [email protected] 3 points 1 year ago

I'm using the Unify G3 Flex inside and outside of our summer house in Poland. It can be run local only if you don't connect it to their cloud. It has a nice HomeAssistant integration too.

[–] [email protected] 3 points 1 year ago

Another vote for Reolink.
They can be completely local network, and integrate really well with home assistant.

[–] [email protected] 2 points 1 year ago (1 children)

@viq @[email protected] @[email protected] I use Foscam cameras. They have local streams and a local api for integration. I use them with BlueIris. I have about 11 cameras. You should be able to get them in EU.

[–] [email protected] 0 points 1 year ago

@GavinCampbell
I use Annke Cams, they work locally and have good value.
@viq @[email protected] @[email protected]

[–] [email protected] 1 points 1 year ago
[–] [email protected] 1 points 1 year ago

I’m happy with Amcrest cameras (good video stream, accessible via web browser), my old Foscams also still work well. Just put them in a VLAN without Internet access to make sure they don’t phone home.

[–] [email protected] 1 points 1 year ago

@viq
ESP32 Cam.
You can program them yourself.
Just Not good in darkness.
Outside I used Lupus. German Product, works with or without Cloud.
@[email protected] @[email protected] @neil

[–] [email protected] 0 points 1 year ago

@viq @[email protected] @[email protected]
Take a look on anpviz onvif cameras.

[–] [email protected] 0 points 1 year ago

Just grab some old webcam, use an RPI with MotionEye and you are good to go. Bonus? With an non-IR RPI camera you'll have "nightvision" and with MotionEye automatic gain control.