Linux

My brother works great, but check here for whatever model you looking at

https://openprinting.org/printers

Brother laser printers are great. As long as you get one that supports Postscript (Brother calls this BR-Script), PCL5 or PCL6. You can see this under the "emulations" printing specs on a printer model page. PostScript and PCL both have fully open source implementations so you'll usually be able to just use built-in CUPS gutenprint or foomatic drivers. I also recommend ethernet (wired or wireless) and not usb.

Do not get one that only says "GDI" emulations which is Windows based and can be really painful to deal with.

Brother printers are well known for working well within Linux. Personally, I have a MFC-J4335DW and it works very well with the generic IPP Everywhere driver. Depending on your distro, you may have to enable avahi-daemon yourself in order to get network printer auto-detection to work, but after that it just works. Even the scanning portion of the all-in-one works well!

I have two printers a HL-L2350DW b&w laser printer and a label printer. The laser printer is connected to our wifi and is detected in Fedora and Ubuntu without having to install additional drivers.

On another note, Brother laser printers are a really good buy. I have a used one that won't die and still on its original fuser assembly. Something like this from Amazon should work gangbusters. Just get an Asurion warranty just in case but Brothers are workhorses. And indeed the MFC-L2690DW does work with Linux.

My HL2170W just works. I have every reason to believe its current replacement would just work. I don't even know which drivers I'm using. Good luck.

I got my trusty HL-L2360D. It doesn't print color, but nor do I need to. I mainly use it as a network printer, thru its ethernet port. The USB printing works with no issue on Linux using the USB-IPP. It uses dry toner, so no issue of having to buy new cartridge after not printing a while.

I think I read somewhere they're trying to add some bullshit features on their newer products to "compete" with the other shitty printers. I hope I'm wrong on this.

Printing with my black and white Brother laser printer "just works". 100%. Ubuntu 20 and 22 automatically found it on my home wifi, prints to it from multiple apps. No sweat.

My black and white printer works without having to install any drivers. Scanning over the network requires a proprietary Brother driver.
My color printer requires a proprietary Brother driver to use it.

If the printer supports IPP Everywhere or AirPrint, it should print without needing any drivers.

I don't know about the newest models, but I've had a pretty good experience with Brother printers, CUPS works fine, and they do release their own driver if you really want to use that.

I got the HL-L2325DW last year. Connecting it to the WiFi using WPS was really easy. Making the desktop see it was a bit of trial and error, but it was partially thanks to the PDF viewer I was using, so I'd recommend printing from a well established viewer like Okular or the web browser, at least for the first use.

I don't remember having to download any drivers manually from their website btw, I just chose it from the list when setting up a new printer. This process might change with the distro and desktop environment though, I'm using Kubuntu.

In fact, if you're a bit lucky, the printer might even show up as a "discovered device" after you connect it to your network, even with a suggested driver and connection so you just need to press next.

Was easy as hell for me, just followed the instructions that came with it and downloaded the drivers through brother's site. Needed the br_scan_skey one too for scanning from the button (but stopped doing that as scanning from the PC just works better, you can change the filetype, "aspect ratio" [not right word but ykwim], and resolution from the pc using something like gnome's Document Scanner, not so from the button.)

I'd look at the specific model before you pull the trigger and go ahead and make sure it has thr drivers on brother's site, for mine (and I imagine most) they have .RPM and .DEB.

Checkout the Open Source brlaser driver and the list of printers it supports. I have a MFC–L2712DW and it works amazingly out of the box.

I have linux mint. It just instantly finds my brother printer on install, as soon as it connects to my network

I have an L2340dw model. Nothing new and fancy. But its been rock solid for almost 10 years now. Cost me 100 euros.

I have a 20 year old B&W Brother laser and a 2 year old color Brother laser... both just work automatically in Linux without needing any setup, configuration, or drivers.

Worked out of the box for me! The scanner works OK with a seperate utility.

I have a Brother HL-L2380DW that has been going strong for years. I love it. I can't remember, but I think Linux Mint just picked it up no problem, and added it to the printers. In the past, I do remember installing drivers from Brother, but I've recently done some clean installs and I want to say I didn't have to do all that. My memory is foggy, though.

I don't believe it's all that difficult. Best idea is to check either brother's website or the brlaser project on github. Here is something for you to read over.

In my experience, Brother printers have been the best. Litterally just Plug 'n play. I got a cheaper laser printer from them that only connects via USB, but I had no issue in setting it up with a raspberry pi running CUPS to get network-wide access that all my devices automatically recognise with no need for any manual setup by end users.

While the Linux integration wasn't a huge deal for me I just wanted to add one point: Be aware of the fine dust situation laser printer create and why some people are having issues. For home use a inkjet is sometimes preferrable if one can't position it right (as we often can't at home)

Sadly at least in the last test I read Brother was one of the worst offenders together with HP.

(I still have one but keep it in my office away from the living areas)

I have an mfc 8900 that works flawlessly on Gentoo, it didn't take too much futzing around to get both printing and scanning to work.

My HL2030 is incredibly easy to use from Linux

Don't. You'd probably be fine with Ubuntu or Fedora since they're officially supported by Brother, but if you want to use something different, preper to struggle... a lot

I tried to set up the DCP-7055W on Arch before just giving up and using my phone