Linux

48640 readers

1397 users here now

From Wikipedia, the free encyclopedia

Linux is a family of open source Unix-like operating systems based on the Linux kernel, an operating system kernel first released on September 17, 1991 by Linus Torvalds. Linux is typically packaged in a Linux distribution (or distro for short).

Distributions include the Linux kernel and supporting system software and libraries, many of which are provided by the GNU Project. Many Linux distributions use the word "Linux" in their name, but the Free Software Foundation uses the name GNU/Linux to emphasize the importance of GNU software, causing some controversy.

Rules

Posts must be relevant to operating systems running the Linux kernel. GNU/Linux or otherwise.
No misinformation
No NSFW content
No hate speech, bigotry, etc

Related Communities

Community icon by Alpár-Etele Méder, licensed under CC BY 3.0

founded 5 years ago

MODERATORS

[email protected]

Upgraded the CPU and now have GPU problems... any help? (self.linux)

submitted 14 hours ago* (last edited 13 hours ago) by mumei to c/[email protected]

10 comments fedilink hide all child comments

I went from a 2600x to a 5600 (yes, MoBo is compatible after BIOS update) and now for some reasons I get 1FPS in games and monitor is not really detected (resolution is fine, but I can't change refresh rate and in "color" settings it's shown as "None-1 Monitor").

I tried:

monitor factory reset;
updating GPU drivers (was already running latest);
removing and purging GPU drivers (sudo apt remove ~nnvidia and sudo apt-get purge nvidia*) and reinstalling (sudo apt install pop-desktop system76-driver-nvidia);
resetting RAM speed to factory (2400Mhz).

Still nothing.

As you can guess from the commands, I'm running PoP!_OS and a nVidia GPU.

What else can I try?

Thanks in advance!

Issue found: I disabled secure boot from BIOS and now I can change resolution and refresh rate. Since I updated BIOS just before installing the new CPU it went under the radar

top 10 comments

sorted by: hot top controversial new old

[–] yesman 10 points 12 hours ago (1 children)

Is it possible you plugged your monitor into the motherboard video output? (I've done this)

[–] Cort 4 points 8 hours ago

I don't think motherboard video would work at all with a Ryzen 5600, as they don't have an igpu at all

[–] [email protected] 6 points 14 hours ago (1 children)

Boot from a USB stick with a Live environment on it. See if you get the same issue.

[–] mumei 8 points 13 hours ago* (last edited 13 hours ago)

Issue found: I disabled secure boot from BIOS and now I can change resolution and refresh rate. Thanks for the help!

[–] [email protected] 5 points 14 hours ago (2 children)

When you swapped CPUs, did you remove your GPU? Even if you didn't, are you sure it's fully seated?

[–] mumei 12 points 13 hours ago* (last edited 13 hours ago) (3 children)

Issue found: I disabled secure boot from BIOS and now I can change resolution and refresh rate. Thanks for the help!

[–] vikingtons 5 points 10 hours ago

FWIW, your UEFI is generally likely to reset with significant hardware changes (system memory, CPU). It's generally fine with video card, disk and power supply swaps so long as it doesn't boot into a stop code as a result.

[–] [email protected] 3 points 9 hours ago

How does that make any sense?

[–] [email protected] 4 points 13 hours ago

Huzzah! Congrats

[–] mumei 3 points 14 hours ago

Checked it just now and yes it's properly seated. Checked power cables too and those are good as well. Cleared CMOS and now display defaults to 1024*768 resolution with no way to change it lol