Linux

48624 readers

1693 users here now

From Wikipedia, the free encyclopedia

Linux is a family of open source Unix-like operating systems based on the Linux kernel, an operating system kernel first released on September 17, 1991 by Linus Torvalds. Linux is typically packaged in a Linux distribution (or distro for short).

Distributions include the Linux kernel and supporting system software and libraries, many of which are provided by the GNU Project. Many Linux distributions use the word "Linux" in their name, but the Free Software Foundation uses the name GNU/Linux to emphasize the importance of GNU software, causing some controversy.

Rules

Posts must be relevant to operating systems running the Linux kernel. GNU/Linux or otherwise.
No misinformation
No NSFW content
No hate speech, bigotry, etc

Related Communities

Community icon by Alpár-Etele Méder, licensed under CC BY 3.0

founded 5 years ago

MODERATORS

[email protected]

Analog Phone Line to SIP (self.linux)

submitted 9 months ago* (last edited 9 months ago) by TCB13 to c/[email protected]

17 comments fedilink hide all child comments

Hello,

So I have a Motorola SM56 USB Data Fax Modem (aka Apple USB Modem for some people) and according to information online this modem supports V.92, Caller ID, wake-on-ring and most importantly telephone answering (V.253).

At a place I happen to have an old telephone analog line that gets calls and unfortunately I can't get rid of. Any ideias / links / software on how can I use the modem + a low end box / ARM SBC to "digitize" the phone line into a generic SIP / VOIP that I can then connect to using MicroSIP on another computer?

Thank you.

Update on this:

I just tried the modem under Windows with a few programs such as Phone Dialer Pro and the built in dialer.exe and while the modem can detect incoming phone calls and place calls I can't pass the audio back to the operating system / phone software.

I did some research about the SM65 and it seems like it was designed to have an headset directly attached to it like on those PCI cards that also use it:

The built in COM port of the modems seems to be only usable to control the modem via AT commands and can't be used to pass audio form and to the system.

you are viewing a single comment's thread
view the rest of the comments

[–] [email protected] 3 points 9 months ago (1 children)

Why can't you have your phone provider convert your service to digital? If they provide cell service too, you might even get them to port the number to cell service.

[–] TCB13 0 points 9 months ago (1 children)

Close to no cell service in the location, let alone optic fiber or any other means. Stuck with an analog landline that does ADSL at around 3.5 Mbps.

[–] [email protected] 1 points 9 months ago* (last edited 9 months ago) (1 children)

I'd still start by calling your provider and see what they think. They might jump at the chance to get rid of an old analog line.

Though I will warn you that IP telephony, while generally reliable, is still not as reliable as POTS. If this is critical to life safety, I'd just not mess with it.

I'm not aware of any software to do that, but I'm sure it exists. If you want to buy a device, you can get an FXO gateway or hybrid ATA. Those will let you use a VoIP phone over a POTS line, I think.

Also, if you already have Internet access, perhaps you might get a femtocell to provide local cell service over that ADSL connection.

[–] TCB13 2 points 9 months ago

I’d still start by calling your provider and see what they think. They might jump at the chance to get rid of an old analog line.

Tried that route, they offered us a free cellphone line for a month and the thing was working around 2-3 hours a day around the middle of the day. They simply gave up and told me that they didn't have other options on that location.