Buildapc

3844 readers

36 users here now

founded 2 years ago

MODERATORS

Lemmenmo

Display issue (self.buildapc)

submitted 10 months ago by Lime66 to c/buildapc

31 comments fedilink hide all child comments

I finished building my PC recently. when I turn on the monitor when the computer isn't on, there's obviously no signal and I see the bouncing logo, but when the computer is on, it says that there is no signal, and that my monitor is going into standby mode, and the display turns off. my gpu seems to be working fine, and I reseated my ram. What should I do?

you are viewing a single comment's thread
view the rest of the comments

[–] Lime66 2 points 10 months ago (1 children)

The light means that the CPU is not detected, but it turns off quickly

[–] Exulion 1 points 10 months ago (1 children)

Try reseating your CPU, check the pins to make sure you didn't bend one. Taking some photos and zooming in can help you get a better look.

[–] Lime66 1 points 10 months ago (1 children)

According to the manual all of the lights are supposed to turn on briefly.

[–] Exulion 2 points 10 months ago (1 children)

Sorry got busy and work. Any luck? None of lights stay on?

If not I would just double check and reseat everything, and for shits and giggles pull the cmos battery for 30s and put it back, if you haven't already.

If nothing else works I would be thinking about RMAing the mobo.

[–] Lime66 1 points 10 months ago

Only the boot light stays on even though I have a boot device. (And am trying to boot into bios)