this post was submitted on 19 Jun 2023
7 points (100.0% liked)

Buildapc

3808 readers
2 users here now

founded 1 year ago
MODERATORS
7
Graphics card help (self.buildapc)
submitted 1 year ago* (last edited 1 year ago) by UnicornKitty to c/buildapc
 

I built my computer 8 months ago. 6 months later, the mouse pointer started lagging so bad it was unusable. I tried some fixes but nothing really helped. The next day, my computer didn't work. POST says it's the graphics card. Okay, I got a new one. It arrived today and I put it in. Nothing has changed. The fans on the old one worked, so it had power. Did I misread my beeps or do something else wrong. I know enough to build a pc, but not enough to troubleshoot it.

This is my motherboard. It doesn't have onboard graphics.

This is the old graphics card.

This is the new one.

Help!

As requested: 1 long beep, 3 short. No unusual flashing. It powers on fine and everything appears to be working inside, but it does the beeps and doesn't show anything on the monitor. This is the power supply.

you are viewing a single comment's thread
view the rest of the comments
[–] Fredol 3 points 1 year ago (9 children)

Would you mind sharing more on what's happening? Does it refuse to power on anymore? Do you get some sort of error message? What kind of power supply do you have?

[–] SugaryBurro 2 points 1 year ago (5 children)

Agreed, usually for troubleshooting you strip it down to the bare essentials if it isn't booting. 1 stick of ram, no hard drive, some type of graphics. Getting it as simple as possible so you are removing variables.

I've seen mice that prevent a computer from posting, so sometimes it's really weird causes.

[–] UnicornKitty 1 points 1 year ago (4 children)

Honestly, I'm wondering at this point if I shouldn't just get another motherboard. This one doesn't have onboard graphics, so I have no way to do what you're saying. My mouse is Bluetooth so it's not even in the same room anymore. I only have access to a laptop now, so I can't even put the hardware in a different computer to test it.

[–] Ralphensnitch 2 points 1 year ago (1 children)

I was actually going to ask if you had another one. Sometimes it isn't the card, it is the slot or a controller. If you have access to another board you can rule that out.

[–] UnicornKitty 1 points 1 year ago (1 children)

I've basically come to the conclusion that a new motherboard is necessary. Should I assume this was a one off and get the same one, or try a different one?

[–] Ralphensnitch 2 points 1 year ago

Your current might be under warranty. I would check that first. You don't need to change it if you are happy with the theoretical limits of it.

load more comments (2 replies)
load more comments (2 replies)
load more comments (5 replies)