homeassistant

12131 readers

23 users here now

Home Assistant is open source home automation that puts local control and privacy first. Powered by a worldwide community of tinkerers and DIY enthusiasts. Perfect to run on a Raspberry Pi or a local server. Available for free at home-assistant.io

founded 2 years ago

MODERATORS

[email protected]

103

Don't forget Temperature Sensors for your Fridge! (self.homeassistant)

submitted 1 year ago* (last edited 1 year ago) by ArmoredCavalry to c/homeassistant

40 comments fedilink hide all child comments

Learned my lesson after a trip last week... I have sensors for nearly everything, but somehow totally forgot about the Fridge / Freezer.

A power outage made my fridge lose it's mind and turn off cooling, even after it powered back up. Unplug / replug seems to have fixed it, but all the food was spoiled when we got home. Simple $10 temperature sensor could have saved everything!

you are viewing a single comment's thread
view the rest of the comments

[–] ElRompeCulo 25 points 1 year ago (1 children)

Might be a dumb question since I have no experience with sensors. What would you have been able to do if the received an alert while you were out of town is the sensor able to turn the fridge off and on? Is that what you meant by “simple $10 temperature sensor could have saved everything”?

[–] [email protected] 27 points 1 year ago* (last edited 1 year ago) (2 children)

You could then call a friend or family member and ask them to check on it.

Or if you had it on a smart outlet you could try rebooting it.

[–] ArmoredCavalry 14 points 1 year ago (1 children)

You could then call a friend or family member and ask them to check on it.

This is exactly what I had in mind.

Fridge is probably one of the few things I'm hesitant to put on a smart outlet, just because chance of something going wrong with it.

[–] [email protected] 5 points 1 year ago (2 children)

A lot of smart outlets develop problems over time from the inductive surge current on electric motor startup (air conditioner, fridge, dehumidifier). The current ratings in ads are generally for resistive loads. Inductive load limits can be 30% less.

[–] [email protected] 1 points 1 year ago

I have a Sonoff S31 on my fridge for about 3 years now for power monitoing and have had no issues. I'm sure the fact I don't switch it on and off and it's locked to stay on on power up helps prolong it's life. If you never switch the load I don't see how it's life could be impacted. But I do have a temp sensor on the fridge so any failures I would be alerted to.

[–] ElRompeCulo 7 points 1 year ago

Ah makes total sense. Going to start looking into sensors for my house now. Anymore obvious locations that haven’t been mentioned yet?