this post was submitted on 30 Nov 2024
144 points (96.8% liked)
Videos
14412 readers
707 users here now
For sharing interesting videos from around the Web!
Rules
- Videos only
- Follow the global Mastodon.World rules and the Lemmy.World TOS while posting and commenting.
- Don't be a jerk
- No advertising
- No political videos, post those to [email protected] instead.
- Avoid clickbait titles. (Tip: Use dearrow)
- Link directly to the video source and not for example an embedded video in an article or tracked sharing link.
- Duplicate posts may be removed
Note: bans may apply to both [email protected] and [email protected]
founded 2 years ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
๐
My only gripe with the LED ones is that they always seem to have a high-frequency flicker which gives me a headache. Other people have told me they don't notice it, but I do. I wanted to replace the clear incandescent ones with LED but couldn't deal with the flicker.
It is either a ~~30~~ 60 or ~~60~~ 120 Hz flicker, depending on how they built the electronics. It is ~~30~~ 60 Hz if they didn't include an inverter and ~~60~~ 120 Hz if they did.
Without an inverter, it will be off for 50% of the time. With an inverter, it will always be on, but sometimes dim.
With better electronics, it will be steady on, but that's not common in christmas lights.
Not strictly always true, if the lights have any kind of dimming capability (like many of the ones with automated patterns) you'll likely be dealing with PWM which means the time spent lit can vary significantly
Wouldnโt that be 60 Hz without a rectifier, and 120 Hz with one? If the voltage crosses zero twice per cycle, but goes negative only once.
Yep, you're right. Had the 2 on the wrong side. Fixing.