homeassistant

12120 readers

110 users here now

Home Assistant is open source home automation that puts local control and privacy first. Powered by a worldwide community of tinkerers and DIY enthusiasts. Perfect to run on a Raspberry Pi or a local server. Available for free at home-assistant.io

founded 1 year ago

MODERATORS

[email protected]

Sourcing Local Network Only, HA Friendly Devices (dubvee.org)

submitted 1 year ago* (last edited 1 year ago) by [email protected] to c/homeassistant

31 comments fedilink hide all child comments

What kind/brand of devices do you recommend and where do your source them? Things like smart outlets, bulbs, sensors, etc.

I have a hard time sourcing gear because it's all either locked to Amazon/Google or requires the manufacturer's cloud services and their dedicated app.

I'm looking for devices that can work completely offline and only communicate with my HA/MQTT or at least a local base station that can bridge to HA.

For the last few years, I've been buying bulbs/outlets from AliExpress with Tasmota pre-flashed. Before that, I was ordering them from Amazon and re-flashing them, but that was always a crapshoot as not all of them were compatible with tuya-convert. They're also ridiculously difficult to disassemble to flash manually.

Anybody willing to share some tips to source some new devices?

Edit: I've also built a few custom sensors with ESP8266 and ESP-Home but they're not particularly pretty.

Edit 2: Thanks everyone! I think I'm going to look into some Zigbee devices and bridges. That sounds like the most "open" way to expand my smart home gear.

you are viewing a single comment's thread
view the rest of the comments

[–] [email protected] 2 points 1 year ago (1 children)

They post a list of recommended devices here: https://www.home-assistant.io/integrations/zha/

[–] [email protected] 2 points 1 year ago (1 children)

Awesome, thanks. That's a great starting point.

Also, it'll be nice to free up some wifi spectrum. My devices are all on an isolated 2.4 GHz network and that band gets quite noisy.

[–] [email protected] 2 points 1 year ago (1 children)

If you have an mqtt server running already, you may want to check out zigbee2mqtt as an alternative to ZHA. Here's the supported adapters list, most of them are USB dongles that you'll have to plug into your home assistant machine.

[–] [email protected] 1 points 1 year ago (2 children)

Yeah, that's probably the direction I'm going to start looking. Pretty much every device I run uses MQTT to communicate with HA, including some custom buttons I keep around the house.

The only sticking point is going to be reconfiguring my HA server to speak to a USB device. It's currently Dockerized, and I've got little experience passing through USB devices that aren't serial adapters. Not a deal breaker, but definitely a speedbump.

[–] [email protected] 4 points 1 year ago (1 children)

I've tried a few different USB zigbee coordinators, but the one I ended up sticking with is the 2652 based coordinator from tubeszb that is Ethernet or USB. I had issues with the USB passthrough to the vm whenever I had to restart the vm, so using that one over Ethernet fixed all my issues.

[–] [email protected] 1 points 1 year ago

Yeah, ethernet would be my preferred bridging mechanism. Thanks for the recommendation. Will look into some bridges from TubesZB.

[–] witten 2 points 1 year ago

Passing through a USB device might be as easy as adding --device /dev/your/usb/device to your docker run command-line, first making sure the permissions on that device are such that they can be read by the container. (Or use the devices: equivalent if you're using Compose.)