this post was submitted on 25 Nov 2024
18 points (100.0% liked)
Apple
17601 readers
161 users here now
Welcome
to the largest Apple community on Lemmy. This is the place where we talk about everything Apple, from iOS to the exciting upcoming Apple Vision Pro. Feel free to join the discussion!
Rules:
- No NSFW Content
- No Hate Speech or Personal Attacks
- No Ads / Spamming
Self promotion is only allowed in the pinned monthly thread
Communities of Interest:
Apple Hardware
Apple TV
Apple Watch
iPad
iPhone
Mac
Vintage Apple
Apple Software
iOS
iPadOS
macOS
tvOS
watchOS
Shortcuts
Xcode
Community banner courtesy of u/Antsomnia.
founded 2 years ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
Mine wouldn’t seat fully and would pop out. Debris in connector. Cleaned out with a needle and it was fine again. Go by the USB C connector seating fully. If it doesn’t, there’s something in there impeding it.
I would suggest a toothpick next time. If you short out the right pins with a needle you can damage your phone.
It’s possible to short, but the port pin outs show 2 or 3 pins between voltage lines and grounds.
It’s a pretty small port and a toothpick doesn’t fit well around the post in the centre if you want to get to the very bottom. I borrowed a very fine sewing needle from stepmom for port cleaning duties.
I did turn it off first though.
Don’t worry about it too much. As long as you don’t physically damage the pins, there is no problem. They are protected against electrical shorts.