homelab

6612 readers

6 users here now

founded 4 years ago

MODERATORS

[email protected]

Sec Camera -> PoE Switch -> L3 Switch -> NVR? (lemmy.ca)

submitted 3 months ago by [email protected] to c/[email protected]

7 comments fedilink hide all child comments

Is it possible to have about 4 PoE cameras attached to a PoE switch in a network closet which will be trunked to a L3 switch where the NVR will be also attached too?

Or would it be better practice to home the NVR in the network closet to supply the power natively.

you are viewing a single comment's thread
view the rest of the comments

[–] [email protected] 1 points 3 months ago (1 children)

Would you be able to draw an ASCII art picture of what you're asking? I'm having a hard time understanding whether the L3 switch is in the same networking closet alongside the PoE switch, and if the NVR is also right next to the L3 switch. Also, is the NVR powered with PoE? Or it needs it's own AC power?

[–] [email protected] 2 points 3 months ago (1 children)

Apologies for late reply (Was in Hospital for the past 4 days) Here is a diagram. https://imgur.com/5VXJHJ6

[–] [email protected] 1 points 3 months ago* (last edited 3 months ago)

Looking at the diagram, I don't see any issue with the network topology. And the power arrangement also shouldn't be a problem, unless you require the camera/DVR setup to persist during a power cut.

In that scenario, you would have to provide UPS power to all of: the PoE switch, the L3 switch, and the NVR. But if you don't have such a requirement, then I don't see a problem here.

Also, I hope you're doing well now.