Ask Science

8678 readers

10 users here now

Ask a science question, get a science answer.

Community Rules

Rule 1: Be respectful and inclusive.

Treat others with respect, and maintain a positive atmosphere.

Rule 2: No harassment, hate speech, bigotry, or trolling.

Avoid any form of harassment, hate speech, bigotry, or offensive behavior.

Rule 3: Engage in constructive discussions.

Contribute to meaningful and constructive discussions that enhance scientific understanding.

Rule 4: No AI-generated answers.

Strictly prohibit the use of AI-generated answers. Providing answers generated by AI systems is not allowed and may result in a ban.

Rule 5: Follow guidelines and moderators' instructions.

Adhere to community guidelines and comply with instructions given by moderators.

Rule 6: Use appropriate language and tone.

Communicate using suitable language and maintain a professional and respectful tone.

Rule 7: Report violations.

Report any violations of the community rules to the moderators for appropriate action.

Rule 8: Foster a continuous learning environment.

Encourage a continuous learning environment where members can share knowledge and engage in scientific discussions.

Rule 9: Source required for answers.

Provide credible sources for answers. Failure to include a source may result in the removal of the answer to ensure information reliability.

By adhering to these rules, we create a welcoming and informative environment where science-related questions receive accurate and credible answers. Thank you for your cooperation in making the Ask Science community a valuable resource for scientific knowledge.

We retain the discretion to modify the rules as we deem necessary.

founded 1 year ago

MODERATORS

Would celite/carbon vacuum filtration perform well enough to remove photopolymers from isopropyl alcohol? (lemmy.ca)

submitted 4 months ago by [email protected] to c/askscience

4 comments fedilink hide all child comments

I am simply on a quest to find an effective non-distillation method for purifying isopropyl alcohol used for rinsing resin 3D prints.

I have seen some elaborate systems for curing and then filtering resin that is suspended in the isopropyl by running it through standard carbon water filters. That just seems a bit over-complex and does a poor job of removing dyes. In some cases, the filters are not fine enough and the isopropyl will eventually get "sticky".

It seems to me that a finer filtration system would work much better. Carbon and celite should catch most of the monomers and oligomers, but I am not sure about the photoinitiators and other additives.

Distillation is obviously the best method for purity, but there may be a worse cleanup and a higher fire hazard risk.

Are there better materials that I could use for filtering besides celite and carbon? IPA is tiny compared to the rest of the molecules I am dealing with so filtration seems viable.

(I should note that I would bulk develop the used IPA in clear plastic containers in the sun for a day or two first.)

you are viewing a single comment's thread
view the rest of the comments

[–] [email protected] 1 points 4 months ago (1 children)

Oh, I missed that it was for 3d printing.

Maybe an actual chemist will chime in, but I couldn't find any sources about purifying or recycling IPA, at least none that you could do at home. At a guess, maybe a reverse osmosis system without the finest membrane? Like you said, the water and IPA molecules should be smaller than the dyes and resins.

Maybe also consider washing with the dirty IPA, and just giving a rinse at the end with the clean IPA in order to conserve. Ultimately it sounds like everything I've found is material you're already familiar with, unfortunately.

[–] [email protected] 2 points 4 months ago

Thanks for looking around! I already have a good selection of chemistry glass and am no stranger to doing home experiments. (I could probably use a good vacuum filter anyways and maybe I am just searching for an excuse to get one.) Distillation is an option for me, but it'll be last resort. Still, having a few proper distillation pieces would go nice with my collection....

Some filter rigs I have seen are using small RO systems, but that seems like a pain to clean and those people probably need to filter a ton of IPA for it to be cost effective. Regardless, it is absolutely worth exploring more as setting up a filter loop would be awesome until it gets gummed up.

This looked promising as it is dealing with ethanol and plant extracts: https://youtu.be/VjxZVpGv_aM?si=5VFLYQkObCzUawbb .. (This video specifically got me thinking about what could/couldn't be filtered and is the root of this post.)

And absolutely, a multi-stage rinsing system is going to be needed if I scale up, which may be in the near future. Full context: I am studying and planning for a reverse engineering/prototyping business, so there could be a considerable amount of printing in my future and this is particular problem is part of the cost analysis.