homeassistant

12211 readers

65 users here now

Home Assistant is open source home automation that puts local control and privacy first. Powered by a worldwide community of tinkerers and DIY enthusiasts. Perfect to run on a Raspberry Pi or a local server. Available for free at home-assistant.io

founded 2 years ago

MODERATORS

[email protected]

Amcrest IP4M-1041B + Home Assistant (www.amazon.com)

submitted 5 months ago by TCB13 to c/homeassistant

11 comments fedilink hide all child comments

Hi,

Is there anyone using Amcrest IP4M-1041B with Home Assistant? I've a few questions about software and integration.

From what I hear, this camera can be setup 100% offline, connected via cable to any computer and by using a built in WebUI the camera has, is this true?
It offers pan, tilt or zoom. Does it work really good with HA? Can it be operated without any Amcrest software / internet connection?
The features above allow you to set preset locations, can that be done on HA / WebUI / without the Amcrest app as well?
Does it really operate all features offline and is it reliable? Eg. motion detection works as expected / doesn't miss events?
What's your overall experience with the camera? Does it compare to let's say a TP-Link tapo?

Thank you.

you are viewing a single comment's thread
view the rest of the comments

[–] [email protected] 4 points 5 months ago* (last edited 5 months ago) (3 children)

I use a bunch of Amcrest PoE cameras. None with PTZ though. I run them to a dedicated box running frigatenvr. From there I allow access from Homeassistant with the frigate integration.

IP cameras allow you to access the device via web gui where you can view and configure the camera for your needs. Once I’ve set them up I only ever access them again through frigate.

[–] zelifcam 1 points 5 months ago

I have the same setup +1

[–] Passerby6497 1 points 1 month ago

More or less the same setup, only I used the frigate HA integration to access the feeds. Was very nice up until the machine running frigate cooked the nvme.

[–] TCB13 1 points 5 months ago* (last edited 5 months ago) (1 children)

IP cameras allow you to access the device via web gui where you can view and configure the camera for your needs. Once I’ve set them up I only ever access them again through frigate.

Thanks for the answer. What kind of management do they provide on their WebUI? Can the camera be 100% operated using the WebUI, standalone without anything else? I'm just trying to understand how dependent on external software (be it their apps, cloud or HA) the cameras are.

[–] [email protected] 2 points 5 months ago (1 children)

You can probably find a visual walkthrough of the GUI by searching youtube.

There's a login page. After you authenticate, there's a live view page, a review/recordings page if you are recording to SD card in camera, and a few settings pages.

I'd say you could absolutely access the camera standalone, but at least the cameras I have don't do any detection or notifications. That's where the NVR comes in. I know reolink has cameras that do all of the above including AI detection.

[–] TCB13 2 points 5 months ago (1 children)

Following your advice I found a video for another model and it seems complete, even motion detection was available on the WebUI. I’m assuming you’re on the exact model I was looking at and it doesn’t have that feature am I right?

[–] [email protected] 1 points 5 months ago

Yep. The models I have don’t have motion detection.