Linux

48652 readers

1179 users here now

From Wikipedia, the free encyclopedia

Linux is a family of open source Unix-like operating systems based on the Linux kernel, an operating system kernel first released on September 17, 1991 by Linus Torvalds. Linux is typically packaged in a Linux distribution (or distro for short).

Distributions include the Linux kernel and supporting system software and libraries, many of which are provided by the GNU Project. Many Linux distributions use the word "Linux" in their name, but the Free Software Foundation uses the name GNU/Linux to emphasize the importance of GNU software, causing some controversy.

Rules

Posts must be relevant to operating systems running the Linux kernel. GNU/Linux or otherwise.
No misinformation
No NSFW content
No hate speech, bigotry, etc

Related Communities

Community icon by Alpár-Etele Méder, licensed under CC BY 3.0

founded 5 years ago

MODERATORS

[email protected]

Wireguard self hosting - Some tricks I don't see mentioned in too many tutorials (feddit.de)

submitted 6 months ago by [email protected] to c/[email protected]

17 comments fedilink hide all child comments

I just finished setting up my Wireguard VPN "server". In this post I want to spread some information, I could've found useful but which didn't come up in most of the Wireguard tutorials.

If you aren't interested in VPN or self hosting, this post is not for you. If you haven't gotten around yet to try it out, I can only recommend doing it. Feels great being able to "phone home" from all over the world.

Alright, tricks and tips:

tcpdump

Wireguard will definitely not work first try. As Wireguard is a silent protocol, you won't see too many error messages. Dropped packets are how you know that something's off. tcpdump is a great command line tool, that, despite it's name, can also dump the precious UDP Wireguard packets. The tool will make you see how far your wireguard connection gets before the packets are dropped. Great for running on "server" and on clients.

ping

A classic tool. Helped me debugging some issues with DNS and Maximum Transfer Unit (MTU) size.

AllowedIPs

In a classic server-client situation, your clients should have AllowedIPs set to 0.0.0.0/0, ::/0 in their repecive configuration file. I found this pretty counterintuitive, but that seemingly is how it works.

IP Forwarding in sysctl

This one was by far the nastiest one to find out. Mainly because I'm not a linux or Debian expert. You need to tell sysctl to forward IP traffic, which ususally tutorials around the web will tell you to do like this: sysctl -w net.ipv4.ip_forward=1; sysctl -w net.ipv6.conf.all.forwarding=1. What I foolishly assumed, that this write operation was permanent. It's not. You need to edit /etc/sysctl.conf for making it permanent. Else, after a reboot you won't be able to connect to the internet. This took me a good amount of reconfigurations from scratch before I eventually found out these vars will reset on boot.

Maybe this helps some of you fellow Lemmings. If I stumble across further tips and tricks, I might update this post in the future. For now though, I think I'm done with my setup (philosophical question: are you ever done with setting up things?).

you are viewing a single comment's thread
view the rest of the comments

[–] TCB13 1 points 6 months ago

Not the case at all. I use both and I can objectively tell your that Wireguard is what the majority of people should be using because it is way easier to understand and setup securely. OVPN is good for other specific cases.