To 3d print something you need to convert a model (.stl or something else) to gcode. A slicer will do this for you. I use Cura (it's open source) and works great on Linux. Then you have to send that gcode to the printer. You can do that with micro SD card which is what I noramlly do or you can connect to the printer using USB cable and send the gcode using a slicer.
Can please someone turns this Linux meme to GNU/Linux meme?
That was my schoolmate...
Yep, he announced his AI.
Does it support Lightning? When will support Monero?
Looks nice, I'll try it!
No problem ;)
That was really hard to do. I created a note for myself and I will also publish it on my website. You can also decrypt the sd using fido2 hardware key (I have a nitrokey). If you don't need that just skip steps that are for fido2.
The note:
Download the image.
Format SD card to new DOS table:
- Boot: 512M 0c W95 FAT32 (LBA)
- Root: 83 Linux
As root:
xz -d 2023-12-11-raspios-bookworm-arm64-lite.img.xz
losetup -fP 2023-12-11-raspios-bookworm-arm64-lite.img
dd if=/dev/loop0p1 of=/dev/mmcblk0p1 bs=1M
cryptsetup luksFormat --type=luks2 --cipher=xchacha20,aes-adiantum-plain64 /dev/mmcblk0p2
systemd-cryptenroll --fido2-device=auto /dev/mmcblk0p2
cryptsetup open /dev/mmcblk0p2 root
dd if=/dev/loop0p2 of=/dev/mapper/root bs=1M
e2fsck -f /dev/mapper/root
resize2fs -f /dev/mapper/root
mount /dev/mapper/root /mnt
mount /dev/mmcblk0p1 /mnt/boot/firmware
arch-chroot /mnt
In chroot:
apt update && apt full-upgrade -y && apt autoremove -y && apt install cryptsetup-initramfs fido2-tools jq debhelper git vim -y
git clone https://github.com/bertogg/fido2luks && cd fido2luks
fakeroot debian/rules binary && sudo apt install ../fido2luks*.deb
cd .. && rm -rf fido2luks*
Edit /etc/crypttab:
root /dev/mmcblk0p2 none luks,keyscript=/lib/fido2luks/keyscript.sh
Edit /etc/fstab:
/dev/mmcblk0p1 /boot/firmware vfat defaults 0 2
/dev/mapper/root / ext4 defaults,noatime 0 1
Change root to /dev/mapper/root and add cryptdevice=/dev/mmcblk0p2:root to /boot/firmware/cmdline.txt.
PATH="$PATH:/sbin"
update-initramfs -u
Exit chroot and finish!
umount -R /mnt
I'm already building the website ;)
RiMusic is great, but I think it's YT Music client and not Spotify. You should give it a go anyway!