Delta3DStudios

joined 1 year ago
[–] Delta3DStudios 2 points 1 year ago

I have heard that once you start vaping a bowl in a vape, you have to finish it in one siting or rest of the bowl will be wasted/taste horrible. Is this true?

So the answer is "kinda".

As mentioned, different temperatures extract different active compounds from the herb. It also cooks different flavor terpenes which affect how the vapor tastes.

When you load and electronic vaporizer, run a partial session, turn it off and then restart at the same temperature, you will find vapor production seriously diminished, and vapor taste changes to more of a "burnt popcorn" flavor.

You have several options in this regard:

  • Temperature-step. Some people enjoy a low temp session in the mornings, and then cooking the same load in the evenings for sedation. This works because you're cooking a new set of compounds. The vapor flavor and production still changes, but it's not quite as bad.

  • Microdose. There are different methods of microdosing with every vaporizer but basically you are cooking only as much as you need for that session and then reloading each time you use the device. This is great if you're a flavor chasing snob like myself lol.

Now there are always exceptions to the rule - butane powered vaporizers don't exactly play by the same set of rules. If you load up a Dynavap Vapcap take a puff and then let it cool down, you won't notice a huge change in performance later when you re-heat the device. But that's also because it's not a flavor-chasing vaporizer, and instead it roasts the herb during the heatup phase which slightly alters the taste anyway - and the heat penetrates to the core of the load much quicker with a butane torch

[–] Delta3DStudios 1 points 1 year ago (1 children)

See I've never been a big fan of the Firefly vaporizers - I'm a clean freak and I always hated how they have the top plate with foam gaskets creating an air tight seal. Shame too because I like the design of the device overall. (The original FF1 was a heavy big ass device, but it was pretty cool to look at. The FF2 is a bit smaller and more manageable in the pocket)

[–] Delta3DStudios 2 points 1 year ago (2 children)

Personally I stick to the plain old devil's lettuce. Vaporizing pipe tobacco can be enjoyable if it's flavored, but yeah I don't bother trying many other herbs lol.

The fun part is the leftovers - unlike smoking you can re-use your leftovers from the dry vaporizer (I call it ABV - Already Been Vaped, others call it AVB - already vaped bud). It's already cooked so you can eat it straight (some people add it to yogurt, others mix it into smoothies or chocolate milk, some make "firecrackers" with crackers and peanutbutter/jelly for example) - the results tend to be more sedative than usual.

I personally have used a sous-vide to make budder using cooked herb which set up in silicone molds. I then make rice krispy treats using the budder.

[–] Delta3DStudios 2 points 1 year ago

Lol, I often ask Chat to describe things to me like a stoned surfer bro, it's hilarious

[–] Delta3DStudios 2 points 1 year ago (4 children)

Oooo you'd be the perfect candidate to try dry herbal vaporizing. 95% of the time those negative complaints you see are from hard core daily smokers who expect the exact same results.... unaware of the fact that dry vaporizing does not yield the exact same results because it is a cleaner way to extract the actual active compounds.

The problem is most stoners confuse the affects of the herb itself.... with that of combustion and inhaling carbon monoxide and carcinogenics. For people in that situation, I actually advise a one or two week "t-break" to let the body fully detox so they can fully enjoy the dry herbal vaporizing.

Prefilled concentrate "vapes" are a completely different ballgame. I equate those to eating junk food - because they taste great and produce awesome clouds..... but they are never "full spectrum" - the extraction process to produce the concentrate doesn't extract "everything", and temperatures used in some extraction processes can actually cook off some of the lower temperature affects. This is why I personally prefer dry vaporizing. I made the switch 11 years ago and haven't looked back - the only time I combust is socially with friends when they're passing around something smokeable - but even then it's a rare occasion (I just hate the taste/smell/effects when combusting).

Not all dry vaporizers are crated equal. Back about ten years ago, there were many cheap no-name vaporizers which were terrible some vaporized extremely slowly (a session could take 20+ minutes for a full complete extraction) - there were even some like the "Atmos Raw" which was claimed to be a dry herbal vaporizer - in reality it was an ecig vaporizer and it had an attachment which would physically burn the herb until it combusted - it was not an actual "Vaporizer". But I know many people who paid $50+ for the Atmos Raw because it was the cheapest "vaporizer" they could find (and there were groupon deals and such offering them for $25, it was sad)

If you're "vaporizer curious" I would start with something like the Xmax V3 Pro or PlanetOfTheVapes One vaporizer - both are great entry level devices which perform well for the price (they are not the best in the industry, but certainly good beginner vaporizers).

Alternatively, there is another brand of Vaporizers made in America called the "Dynavap Vapcap" - which is pretty much unlike any other dry vaporizer on the market - it mimics more of a single-hitter from the combustion side of cannabis in the way it looks. It's not a "traditional" vaporizer in any sense of the word - but there is a reason why it has developed a cult-like following since it's release eight or nine years ago.

[–] Delta3DStudios 1 points 1 year ago

Yeah I've got a few Arizer stems next to me. Yes they are close in size, but I'd still say the Lobo capsule is maybe 5% larger in volume (maybe one millimeter larger diameter than an Arizer stem can hold, and about 2mm taller

[–] Delta3DStudios 1 points 1 year ago

So I have an Xmax V3 pro in my collection. The Lobo has a larger oven and a better heater which doesn't quite "roast' the herb the same way as the xmax v3 pro.

I think it comes down to form factor and load sizes. If the newbie needs a big cloud chaser, I'd go for the Lobo. If they want something with no glass mouthpiece to break, the V3 pro makes more sense.

Personally between the two I'd say the Lobo is better. But it's also a bit more expensive than the V3 pro these days.

[–] Delta3DStudios 3 points 1 year ago (6 children)

I know lots of others answered but I'll try to sum up some notes for you:

  • Combustion releases a ton of extra stuff including a toxic cocktail of carcinogenics and carbon monoxide which are bad for your body. Some of these chemicals release the instant euphoric feeling followed by sedation. People who try dry vaporizing are expecting the same exact effects, when the reality is that it is cleaner and different.

  • Different temperatures extract different active compounds from the herb. In general terms a Sativa vapes great at lower temps (300-385F) while Indica and CBD strains work better at higher temps to extract that sedation and pan relief you get from the herb. This means you can essentially "customize" your high to what you want/need at that time. If you have a hybrid for example you could cook out the low temperature sativa side in the morning, then cook the same herb at night to extract the indica side of the herb.

  • Not all dry vaporizers cook at the same rate. They are essentially miniature ovens. Many people buy cheaper weaker underpowered devices preheat them and suck away like they're hitting a waterpipe - this drains all heat out of the oven faster than the shitty heater can recover temps. The secret here is to either get a higher powered device, OR learn how to slow your roll and take a gentle sip (filling your lungs over 20 seconds instead of filling them in 3 seconds). This is partially why you hear people say vaporizers suck - because they are not obtaining a full extraction before they think it's finished (since they're getting no more vapor it must be fully cooked!).

  • Unlike smoking where you can "Green out" from smoking too much (due to excessive carbon monoxide poisoning which causes you to start vomiting if you smoke too much too frequently), dry vaporizing does not do this. You can essentially get MORE medicated than possible with combustion because you're not inhaling all that nasty toxic shit.

Dry vaporizers come in many shapes and sizes. Some cook faster, some produce tastier vapor for flavor-chasing snobs like myself, some produce bigger clouds, others better for social gatherings, or more stealthy, faster extraction, etc. Most of us true ents have multiple devices in our collection depending on our needs at the time.

LPT - you can pair almost any vaporizer with a waterpipe for some epic vaporbonging action. Price does not equate to performance, there are many other vaporizers besides "ball vapes" that can totally get you where you need to be. Hell on vacation when my preferred portable failed (bad battery), I bought a shitty no-name $85 vaporizer at a smoke shop and was able to make it work for my needs until I got back home lol.

If you let me know more about your budget and what you want to do I can probably set you on a better path than a ball vape - I'm personally not a fan of them for novice users for several reasons.

[–] Delta3DStudios 1 points 1 year ago* (last edited 1 year ago) (2 children)

But you’re saying this doesn’t take capsules? That kinda sucks.

Ah should of mentioned. No this sucker has LARGE dosing capsules (which are larger than the POTV One/Edge and Rogue capsules). So it is a different size dosing capsule. Almost too large in my opinion (these capsules are close to the same size diameter as S&B Capsules, and taller)

[–] Delta3DStudios 1 points 1 year ago (1 children)

Always happy to contribute. For sure if your edge is still chugging along, I don't see any reason to replace it.

the oven is too large for my needs

LPT - you can use an EMPTY dosing capsule as a spacer for microdosing. Place your herb inside the oven, then put an empty dosing capsule on top to hold things in place - you can use the dosing capsule with or without the lid to adjust microdose load sizes.

This works for essentially any vaporizer which uses dosing capsules, including your Fury Edge. It's a great way to get a little nip throughout the day while still retaining that fresh green flavor for each sesh.

[–] Delta3DStudios 10 points 1 year ago* (last edited 1 year ago) (1 children)

Lol, yeah f*ck r_ddit - I'd much rather see this community grow in the fediverse!

convection or conduction heating?

I'd call it a hybrid. Given the placement of the oven and the heater, it feels like it does have a small convection heater, but it benefits greatly from hybrid heating once it heats up.

on-demand or session?

I mean I feel like without a dosing capsule you can probably treat it almost like an on-demand device, HOWEVER it's not. I'm a session guy and I'd treat this more like a session device

i need to know these things for when my milaana vape dies. i feel like the button is already getting a little sketchy. meh.

Having handled an original Milaana (and zion), this is not a Milaana. If you want to directly replace the Milaana, look into any one of the sub-ohm 510 attachment vaporizers on the market and pair it with a decent ecig battery (with subohm compatibility)

Personally, I feel this device is best suited to someone who has a POTV One and looking for an upgrade OR the average ent who has $150 to blow on a vaporizer to "test the waters" and looking for a good entry-level device which is a solid hitter. The oven size is almost too big for me, but I bet it's perfect for the first-time vaporent buying their first device trying to make the switch from smoking.

But yeah, I wouldn't put this in the same ballpark as the Milaana at all haha - that's a very different vaporizer

29
submitted 1 year ago* (last edited 1 year ago) by Delta3DStudios to c/vaporents
 

So I've handled quite a few vaporizers in my time (lost count after a few dozen lol).

I was excited to get this device for a few reasons including a few new aftermarket accessories which will be on the market soon.

I've only handled the device a few times so these are initial impressions:

Pros:

  • Nice heft in the hands - feels solid enough construction for the price. But that's expected from the manufacturer.

  • Flat base - unlike my HealthyRips Rogue which has rounded sides, this device has a flat base so it sits flush on a surface making it more stable (especially with the watertool attached)

  • Massive oven - this oven is larger than the Rogue (which is a decent size already)- it's just a smidge smaller in diameter than the S&B Dosing Capsules (maybe two or three millimeters smaller)

  • Removable 18650 battery - FINALLY!! Yes these batteries are not quite as reliable as the older LiPoly batteries they had been using in older models, but finally we have the ability to swap out batteries when you wear out a battery after 100 hours of use - it's also nice to easily swap out batteries with a precharged battery before heading out. Big win for sustainability over sealed-in batteries

  • USB-C charging - always a win. Now I can use one charger to charge both phone, and vaporizer, as well as any spare 18650 batteries I have with me (no need to lug around my Nitecore D2 on short road trips)

  • Love the upgraded slide mouthpiece. The older pop-in design used by the Rogue felt satisfying, but it was not durable and always wore-out on customers after heavy use. This new slide-in mouthpiece makes the device far more durable - I also like the added magnets for things to snap together

  • Glass mouthpiece - always a nice touch. Plus you can use other tools which slide into the same mouthpiece - including my old HealthyRips "water tool" inline vertical waterpipe which is pretty awesome for vaporbonging on vacation!

  • Fast enough heatup - from a cold start to 350F it took about 45 seconds. Seems like the temperature sensor is measuring a different spot, not exactly on the heater itself - possibly in the air chamber above the heater.. Just based on how I've seen it heatup compared to other devices made by the same manufacturer (including the rogue)

Cons:

  • No pass-through charging. Not entirely unsurprising, but you cannot charge the device while using it. The workaround is simple: buy a few spare batteries and recharge them

  • Short Auto-off timer - feels like the unit always shuts off too fast. I wish it had a 7.5 or 10 minute timer - or the ability to disable it (maybe there is and I haven't RTFM to find out haha)

  • Minimum temperature of 320F - that's a bit high for me personally. I wish they had set it to a minimum of 300F

  • Draw restriction - feels a bit restricted which isn't terrible (and likely intentional), but I would have preferred a bit more

As other's have said, it's an upgraded HealthyRips Rogue and that's a fair assessment - it has some good upgrades (especially the swappable 18650 battery slot) which makes it a fair more durable and sustainable device.

Now to get back to some more R&D so I can finalize some new widgets!

--

[–] Delta3DStudios 1 points 1 year ago (1 children)

Wow! That's totally not the ones that I have for my Fury Edge. The dosing capsules I have always used have lids which pop off. I honestly have never seen any capsules which screw on like you're referring for the HealthyRips so I'd love to see photos (it's my job to keep track of all capsules on the market.... since I make loading and storage options for nearly every capsule on the market).

Funny because also my capsules both for the Fury Edge, HealthyRips Rogue, and my new POTV Lobo which just arrived today with several dozen capsules all have air holes on the bottom and top, but not the sides.

Wait, I think I know what capsules you're referring to, but I don't think they're made by the same OEM I'm referring to - I'm not sure if those were an experimental capsule, or from another manufacturer. Because I think I've seen those, but I have never had access to them personally.

All my capsules match the ones you described for the Xmax V3 Pro (minus the original HealthyRips Fury2 mini screen capsules and S&B dosing capsules)

1
submitted 1 year ago* (last edited 1 year ago) by Delta3DStudios to c/dynavap
 

I was scooping up a new Vapcap-B for a friend as a birthday gift (three days before they announced a BOGO deal on Vapcap-B's!) so I decided to shop around for upgrades for my 2020-M.

I still like the midbody design from my 2020, and the fact that this M was personally gifted to me by George (we met at a CHAMPS show in 2020, but know each other as we shared banking notes when founding our businesses in the same year). But I needed a new captive cap and really like the look of the new Titanium Helix tip so I figured why not upgrade.

REALLY liking this design, I think I like it more than my original first-gen Omnivap.

Before: https://imgur.com/nzgpmVI

After: https://imgur.com/MT98auk / https://imgur.com/Tpovwfg

8
submitted 1 year ago* (last edited 1 year ago) by Delta3DStudios to c/vaporents
 

As I'm sure many of you can imagine, I have a lot of devices in my collection (working and not working, as I sometimes need to test-fit prototypes of custom parts or mods). Heck, a few of my collection have long since been discontinued by this point (Indica vaporizer, Pax1, Grasshopper, VapeXhale Cloud+, Mistvape, etc)

Anyway, I'm looking to grab another portable. But I can't keep up with all the new devices. I'm looking more at the popular budget to mid-priced devices. Thinking about grabbing an Xlux Roffu, although I'm open to suggestions.

Yes, I know S&B is working on releasing a new portable vaporizer in the near future but I'm not waiting for that to drop. (I already have both a crafty and a mighty in my collection lol).

 

I used to spend a lot of time answering newbie questions in the r/vaporents section of reddit, but I'm no longer using that app so I've been trying to fill that void over here on lemmy and elsewhere.

I'm even back on FuckCombustion.com occasionally

I mean there actually seems to be more activity on !trees (@trees for kbin users), but I'm looking more at dry vaporizing specific communities

 

This community is too quiet! Let's get some chatter going!

I've been dreaming up a 3D printed stem for the Vapcap..... but I want to do a few different things that wouldn't be possible with traditional manufacturing, like hollow sections for holding safely without burning your fingers, multiple mini air-intake holes so I can adjust airflow simply by selecting how many air holes my thumb and index finger cover, etc.

I was thinking about something crazy like 3D printing pure silver or gold for that extra bling factor.

I'd love to hear some other thoughts or wishlist ideas from other ents. If you could design your ultimate dream stem, what design elements would you love to see incorporated?

I'm thinking about my classic knurl texture - I gotta add that somewhere to the design! lol

 

Like the old vaporents, to help novice users answer basic questions without cluttering up the main community with mundane questions.

I'll be happy to contribute and help novice users as I did with r/Vaporents

view more: next ›