DSkou7

joined 11 months ago
[–] [email protected] 7 points 3 weeks ago

This is a microsd card inside an SD adapter, that is then inserted into an SD reader in your windows machine right? Some of those SD adapters have a little lock tab that makes the card read-only. Make sure that's in the correct position.

[–] [email protected] 6 points 3 weeks ago

And also are sharp enough to cut your hand if you hold it in the wrong way.

[–] [email protected] 44 points 3 weeks ago* (last edited 3 weeks ago) (1 children)

Actual picture of the real person

[–] [email protected] 11 points 1 month ago

Probably some combination of doctors and a physical therapist. A good general practitioner should be able to refer you to someone.

[–] [email protected] 12 points 1 month ago (1 children)

Northern Utah last I checked.

[–] [email protected] 6 points 2 months ago

You can check the data the drive itself keeps about disk errors. This data is called SMART.

https://www.howtogeek.com/134735/check-ssd-or-hdd-health-with-smart/

Figure out if the drive is having problems or not, then look at replacing it.

Another thing that slows down old laptops is thermal throttling. Once again there are plenty of programs you can download to check component temperatures. Have you cleaned dust out of the inside of the laptop and re-done the thermal paste?

[–] [email protected] 2 points 3 months ago (1 children)

Sounds like you need a pihole.

[–] [email protected] 4 points 3 months ago

The hat is neat.

[–] [email protected] 6 points 3 months ago (1 children)

Sounds amazing. Onto the steam wishlist it goes.

[–] [email protected] 4 points 3 months ago

You start with base HP at level 1. Every time you level up, you roll a die (which die is determined by what class you are playing) and add your constitution modifier.

[–] [email protected] 2 points 3 months ago

Send an email to Corsair support and ask if you can have / buy some screws. They'll probably just send you some. Worst case they can for sure tell you the length you need.

[–] [email protected] 7 points 4 months ago (1 children)

So based on the other comments, I would check the cooler and anything else that was above the CPU to see if something got too hot and dribbled solder on the CPU. Also is the socket next to that drop clean, or are there other smaller droplets nearby?

view more: next ›