Biorix

joined 1 year ago
[–] [email protected] 2 points 1 year ago (1 children)

Hey ! Sorry I didn't saw your message. I came here to explain how I solved it (just now)!

I discovered a lot of nice option in gluetun (like port forwarding)

But turns out the solution was to change the network interface in qBittorrent options from eth0 to tun0... Simple as that

Thanks for your help!

[–] [email protected] 1 points 1 year ago (1 children)

About the IPs, Is the fact that docker is not per say on the same network can influence that ?

[–] [email protected] 2 points 1 year ago* (last edited 1 year ago) (2 children)

Thanks for the response

I checked, but the issue is still there, the IPs are the same as before, as I fixed the IP of the computer on the router. The port are forwarded manually and the server is accessible from outside the network.

The limit is set to original and upload debit, limited to 11 Mbps.

I just added all the local subnetwork IP list as you said, and the option "treat IP WAN as LAN speed" was already checked.

Secure connections are set to "preferred".

Also, I'm able to access my server directly from outside through my public IP, so the forwarding should be good.

Is there a way to see if I pass through relay instead of direct local play?

10
submitted 1 year ago* (last edited 1 year ago) by [email protected] to c/[email protected]
 

My computer crashed recently, and I had to reinstall everything. Since then, I could not have anything above 720p anywhere besides playing directly on the computer that runs plex.

It looks like the maximum rate is 2 Mbps regardless of the original format.

I my install is pretty much the same as before.

I run plex as a docker container on Kubuntu.

CPU : I5-4590

GPU : GeForce 1030

I installed the Nvidia toolbox for docker as well, and everything should be good

I tried activating, deactivating HW transcoding, playing with the transcoding speed option, disabled the iGPU to use only the 1030, but nothing seems to make any difference.

I first thought it was a certain format, but it seems to affect everything. I tried to optimize a file by encoding it with the plex option, but the issue stays.

I thought about a network limitation, but nothing is supposed to have changed.

I'm kind of clueless now on what to do next

Any idea on where to look?

Edit2:

Solved!

I unchecked the "use relay" option, and that fixed it.

I still have issues with certain clients, but that's another problem.

I found it odd that everything defaulted to relay when it could have direct play with certain clients.

Thank you for the help!

[–] [email protected] 2 points 1 year ago

Yes and they are emitting a lot of light pollution. Even more than conventional lights.

[–] [email protected] 2 points 1 year ago

I do

The last version is really nice

With sequence, multicamera, text to speach support

The support for hardware acceleration render could be better but it's getting there

Also you can't have an effect track (or at least I couldn't) which would be great

And I found the stabilization tool to be hard to use.

Other than that it's really good and allow to have a reel pro workflow, and for free !

I prefer it to Shotcut. Blender is also really nice but I think it lacks option in the video editing part. Although I didn't tried it for a long time

[–] [email protected] 2 points 1 year ago (1 children)

I do, and you're right, it was because of bracketing. I thought that this option was to set the steps of the +/- button for exposure compensation in S or A mode. I didn't think it was that, since it seems redundant with the multiple exposure option.

Anyway thanks a lot !

 

I have trouble understanding how to set a fix shutter speed with my camera.

Once I chose a SP, my camera take the picture with the right one then if I take another one shortly after it tries to adapt the shutter speed to have more or less exposure.

Is there a way to remove this option?

For info, I tried in S and M mode, with manual ISO, manual focus, manual WB, and I made sure that the "multiple exposure" option was off in the setting menu.

[–] [email protected] 3 points 1 year ago (1 children)

Rawtherapy is really good The workflow is pretty straitforward and there's a lot of tutorials. It's really professional although it's not as easy as Lightroom.

Darktable is another good alternative but I prefer Rawtherapy

https://fixthephoto.com/darktable-vs-rawtherapee.html

[–] [email protected] 1 points 1 year ago

C'est comme des brochettes normales Tu peux mettre des tomates, des champignons ou ce que tu veux entre les morceaux de seitan

Aussi, tu peux faire mariner le seitan avant pour ajouter des saveurs

[–] [email protected] 1 points 1 year ago (2 children)

So it's seems to be working but all torrents are stalled for some reason

IP leaks can see their file and I can curl an IP from qflood container but somehow the torrent won't download

[–] [email protected] 25 points 1 year ago (5 children)

This is not a matter of different point of view but a moderation one, since they are outnumbered for now with flow of new people and bad actors.

I don't think they did it happily

But we're not concerned since this instance is smaller and probably not as much targeted

[–] [email protected] 1 points 1 year ago (4 children)

I do

Thank you it's really helpful

I'll try it

[–] [email protected] 2 points 1 year ago (2 children)

Thank you

So I read quickly and from what I understand I can generate a wiregard configuration file for example and provide it to this container, thus setting the network directly to the container.

Am I understanding it correctly?

10
submitted 1 year ago* (last edited 1 year ago) by [email protected] to c/[email protected]
 

I'm trying to link a docker container qFlood to my VPN (proton) on the host to prevent IP leaks.

When everything is on the host, I can just choose "proton0" in the network interface to use, but I don't know how to do that inside the container because this interface is not exposed to the container.

Is there a way to do that?

Or even to implement the VPN inside a container?

What the alternative to prevent IP leaks with qBit on docker?

edit:

I used gluetun + qFlood as advised and it worked like a charmed except that I could't seed or leach at all

Turns out the solution was to change the network interface in qBittorrent options from eth0 to tun0… Simple as that

Thank you all for the help!

view more: next ›