Are you absolutely sure you got the P version? Did you do the setup for Z2M from scratch after making the switch? Are you using USB extension cable?
this post was submitted on 26 Nov 2023
10 points (100.0% liked)
homeassistant
12132 readers
22 users here now
Home Assistant is open source home automation that puts local control and privacy first. Powered by a worldwide community of tinkerers and DIY enthusiasts. Perfect to run on a Raspberry Pi or a local server. Available for free at home-assistant.io
founded 2 years ago
MODERATORS
i'm pretty sure i have the P version, and i did flash latest firmware for P version, i did a complete Z2M setup as i also swapped my raspberry for a mini pc at the same time but i haven't tried with an usb extender, will try that in a few hours and will update my comment. Is there a way to check visually if i have the P version ? Thanks for your answer
Edit: can confirm i have P version, model: ZBDongle-P Edit2: just tried to pair them again with an usb extender but still same
Can you provide the part numbers of sensors you’re trying to pair? You said you managed to successfully pair one of each, that would indicate that the sensors are supported by both Z2M and your router. Did you physically move the router away from the USB ports? How are you running HA? Bare metal, VM, container, supervised?
thanks for helping, I'm running a VM with HA OS (proxmox), i just realised that z2m crash when trying to pair those devices and watch dog isn't starting z2m back. I might load a backup when i was using my raspberry with conbee 2 and replace sonoff dongle by conbee 2 to see if same thing is happening which would indicate it has something to do with my proxmox VM
here are the logs when i try to pair:
Zigbee2MQTT:info 2023-11-28 16:13:42: Zigbee2MQTT started! Zigbee2MQTT:info 2023-11-28 16:13:48: Zigbee: allowing new devices to join. Zigbee2MQTT:info 2023-11-28 16:13:48: MQTT publish: topic 'zigbee2mqtt/bridge/response/permit_join', payload '{"data":{"time":254,"value":true},"status":"ok","transaction":"fh35x-1"}' Zigbee2MQTT:info 2023-11-28 16:13:52: Device '0xa4c138d5784acca7' joined Zigbee2MQTT:info 2023-11-28 16:13:52: MQTT publish: topic 'zigbee2mqtt/bridge/event', payload '{"data":{"friendly_name":"0xa4c138d5784acca7","ieee_address":"0xa4c138d5784acca7"},"type":"device_joined"}' Zigbee2MQTT:info 2023-11-28 16:13:52: Starting interview of '0xa4c138d5784acca7' Zigbee2MQTT:info 2023-11-28 16:13:52: MQTT publish: topic 'zigbee2mqtt/bridge/event', payload '{"data":{"friendly_name":"0xa4c138d5784acca7","ieee_address":"0xa4c138d5784acca7","status":"started"},"type":"device_interview"}' Zigbee2MQTT:info 2023-11-28 16:13:53: MQTT publish: topic 'zigbee2mqtt/bridge/event', payload '{"data":{"friendly_name":"0xa4c138d5784acca7","ieee_address":"0xa4c138d5784acca7"},"type":"device_announce"}' Error: Unhandled error. (TypeError: Cannot destructure property 'vendor' of 'data.device.definition' as it is null. at EventEmitter. (/app/data/extension/miboxer-fut089z-controls-exposer.js:151:21) at EventEmitter.emit (node:events:525:35) at EventBus.emitDeviceMessage (/app/lib/eventBus.ts:102:22) at Controller. (/app/lib/zigbee.ts:108:27) at Controller.emit (node:events:513:28) at Controller.selfAndDeviceEmit (/app/node_modules/zigbee-herdsman/src/controller/controller.ts:527:14) at Controller.onZclOrRawData (/app/node_modules/zigbee-herdsman/src/controller/controller.ts:738:18) at ZStackAdapter. (/app/node_modules/zigbee-herdsman/src/controller/controller.ts:144:70) at ZStackAdapter.emit (node:events:513:28) at ZStackAdapter.onZnpRecieved (/app/node_modules/zigbee-herdsman/src/adapter/z-stack/adapter/zStackAdapter.ts:823:30)) at new NodeError (node:internal/errors:387:5) at ZStackAdapter.emit (node:events:502:17) at emitUnhandledRejectionOrErr (node:events:394:10) at processTicksAndRejections (node:internal/process/task_queues:85:21)`
here are the devices that failed to pair: https://www.zigbee2mqtt.io/devices/WSDCGQ11LM.html (i have 3 of those and one is failing to pair)
https://www.zigbee2mqtt.io/devices/TH02Z.html#tuya-th02z (did a mistake as i have 2 of them and none are pairing)
couple more devices that fails since i started thi post: https://www.zigbee2mqtt.io/devices/AB3257001NJ.html#osram-ab3257001nj
https://www.zigbee2mqtt.io/devices/ERS-10TZBVK-AA.html#tuya-ers-10tzbvk-aa
Edit: HA fail to load my backup file, saying it needs a .tar file (but i did point to a .tar file), will do a fresh install and load my backup to see if same is happening
Edit2: issue with backup file was due to firefox, works in chrome
Edit3: using my backup and conbee, everything works fine (at one exception, a zigbee remote which i remember was a pain to setup. remote is paired but not working yet... https://www.zigbee2mqtt.io/devices/FUT089Z.html