cross-posted from: https://lemmy.world/post/8615378
Designed and 3d printed my own custom case for the K8 Pro, since I thought it was too tall and I didn't want a wrist rest.
this post was submitted on 22 Nov 2023
31 points (100.0% liked)
Mechanical Keyboards
8825 readers
15 users here now
Are you addicted to the clicking sounds of your beautiful and impressive mechanical keyboard?
If so, this community is for you!
Here you can discuss everything about mechanical keyboards (and only mechanical keyboards).
Banner by Jay Zhang on Unsplash
founded 4 years ago
Nice! I have a K2 original version which is super tall. I’ve been thinking of doing this but never went through with it.
It was way more work than I anticipated. Getting the measurements correct for the standoffs, daughterboard, switches etc took a lot of work and test prints to get right. OTOH I got a working prototype ready pretty fast (1-2 days) which basically just had the standoffs and the daughterboard exposed.
You might also consider doing something like this guy did: https://lemmy.world/post/2817315
nice!
Question about this keyboard. Is there a good alternative to the Caps lock ? I keep hitting it when I press "A".
Get yourself a stepped caps lock keycap, something like this:
https://cdn.shopify.com/s/files/1/0218/4886/products/SteppedCaps_grande.jpg
Keychrons are reprogrammable, so if you want you can swap capslock for some other key (or straight up disable it)