this post was submitted on 19 Nov 2023
8 points (100.0% liked)

Pottery

448 readers
1 users here now

This is a place for potters and pottery lovers to share their art and be a community.

RULES

  1. Be kind.
  2. Not all posts have to be your own work. If the work is not your own, then credit to the artist should be established.

founded 1 year ago
MODERATORS
 

I have a lot of dry clay I have saved to reuse. Most of it is in smaller pieces, I'm working my way to making it into powder. I'm thinking of getting a rock tumbler to make small batches of powder since most of the pieces are pretty small anyway.

Currently, i put the powder and sometimes granules into a bucket and pour white vinegar and very hot water over it, sometimes mixing immediately sometimes waiting for it to cool. I always let it rehydrate for at least a few days before drying on a plaster board.

Currently I mix the clay by folding and flattening, as this is easier than wedging for me. I'll wedge smaller pieces, but for these larger ones I'll pop the air bubbles and smooth it out. So far it's been ok but I'll sometimes have a bubble I missed until I am nearly done shaping on the wheel.

Does anyone have suggestions for how to decrease the air bubbles trapped from rehydrating? Would a vibrating paint mixer work?

top 8 comments
sorted by: hot top controversial new old
[–] [email protected] 2 points 1 year ago (1 children)

Mastodon friends, do I know anyone into #pottery on here? If so and you can spare a sec, question for you upthread ^

#clay #ceramics

[–] [email protected] 0 points 1 year ago (1 children)

@thegiddystitcher long time potter. Happy to answer questions. New to Mastadon

[–] [email protected] 0 points 1 year ago (1 children)

@ellwall Ooh welcome! 🥳

If you check out the post I was replying to, someone had a question about bubbles in clay that I thought someone here might have an answer to.

(If you can't see it for whatever reason its at https://lemmy.world/post/8470206)

I'm no potter but never turn down the opportunity to learn more about other crafts just in case I take them up one day 😆

[–] [email protected] 0 points 1 year ago (1 children)

@thegiddystitcher
Hi, I can’t create an account in Lemmy because captcha is in decipherable. Youtube has videos on stack and slam wedging, ideal for ridding recycle clay of air pockets. They are easy to find. Also, pulverizing the clay creates a lot of clay dust which is unhealthy to breathe. Instead, slake down all the dry clay in a bucket. Then turn out on a a cloth or pillowcase to let the water drain. When it’s no longer sticky, begin wedging.

[–] [email protected] 0 points 1 year ago

@ellwall Thanks! To be clear I was definitely not asking you to make an account anywhere (that would be extremely demanding of me!). But the two apps talk to each other, it's very clever, so your helpful info will make it to the OP 🙂 Much appreciated!

[–] [email protected] 2 points 1 year ago (1 children)

You do not have to make it into a powder you can just rehydrate the bigger pieces and that will work fine. I will typically just break up clay I am reclaiming into quarter sized pieces and let it rehydrate for like a week. I'll mix it as it is dehydrating, maybe once every couple days. Then when I want to reclaim I will just pour off the extra water and put it on plaster.

You do not have to wedge it all at the same time. You could do whatever mixing method you want, then wedge small portions for throwing. I think the air bubbles are coming from the folding.

[–] WeeSheep 1 points 1 year ago

I've had larger pieces that just didn't rehydrate while everything else is a wet mess. I'll use very hot water (our water heater is set to 180f) and vinegar, giving it at least a few days to a week to rehydrate. That's why I started trying to get everything into smaller pieces or even powder. I've had the fewest air bubbles with smaller pieces or powder. I think air is trapped in the clay that doesn't come out when soaking.

[–] glimse 1 points 1 year ago

How coincidental to see a pottery post the day after I spent a night binging videos about clay!

I haven't done pottery since middle school but this guy has a ton of videos about making/reusing clay. Sorry for commenting without an actual answer but maybe you can find some tips on that channel? From what I saw he wasn't too concerned with breaking it up super fine. In one video he just smashes up the dried clay in his driveway. I didn't see anything about air bubbles aside from kneading it really hard to get rid of them