this post was submitted on 22 Jul 2023
7 points (100.0% liked)

Cars - For Car Enthusiasts

3978 readers
4 users here now

About Community

c/Cars is the largest automotive enthusiast community on Lemmy and the fediverse. We're your central hub for vehicle-related discussion, industry news, reviews, projects, DIY guides, advice, stories, and more.


Rules





founded 2 years ago
MODERATORS
 

So on the integra the front turn signal is made oit of two bulbs, I need the one circled in red to be white to pass inspection in my country. The problem is the bulb itself is white, but there is an orange filter inside and I cannot remove it.

My idea was to put in a bright blue bulb in there to compensate for the orange filter and make it appear white. Is that doable? Has anyone tried?

top 12 comments
sorted by: hot top controversial new old
[–] AttackBunny 2 points 1 year ago (1 children)

Haven’t tried it, but I’d imagine a blue bulb will just make a weird color, that’s it white.

Chances are you’re going to either have to find the housing, that came on the car in your country, or disassemble the housing and remove the orange reflector.

[–] DominicHillsun 1 points 1 year ago (1 children)

Man, I really doubt that thing will dissasemble, I think everything was glued together

[–] AttackBunny 2 points 1 year ago (1 children)

You have to heat it, and probably do a little prying, to get the glue to come apart, but it can be done. I’ve done it. I’m sure there are videos on YouTube explaining exactly how.

[–] DominicHillsun 1 points 1 year ago

Okay, if the trick with blue lights wont work, I'll give it a try

[–] [email protected] 2 points 1 year ago (1 children)

How much access do you have to the inside? It’s an orange reflector rather than an orange filter, right? Can you cover the reflector with something?

I don’t think the blorange option will work as well as you think it will, it’s going to end up looking primarily blue or primarily orange, or different from different angles or something equally not ideal.

[–] DominicHillsun 2 points 1 year ago (1 children)

The plastic housing is not something I can dissasemble without breaking, it's literally a transparent orange plastic and then the outer layer is clear plastic.

I will give it a try, but I would greatly appreciate an example of blue light fitering

[–] [email protected] 2 points 1 year ago* (last edited 1 year ago) (1 children)

I don’t have an example to show you I’m afraid.

You’re thinking of mixing two separate light sources. You’re right that if you had a pure blue light and a pure orange (well, yellow) light, and pointed them both exactly at the same spot (and you balanced their relative intensity properly), the resulting light would appear white.

But you’re not talking about that. You’re talking about filtering light, which is subtractive not additive like mixing light. So your blue light will either be pure blue (eg led) and have no red or green in it, or it’ll be white light that’s passed through a filter removing red and green. Then you’ll pass it through another filter that will remove the blue to leave the red and green. But there’s no red and green to remove, so with a perfect filter and a perfect blue light you’ll get nothing.

(Actually a bit more complicated cos you can have pure orange/yellow light, it doesn’t have to be red light plus green light, but the result is mostly the same)

So probably you’ll end up getting some muddy coloured light out. Which might end up looking blue or orange from different angles.

It looks like the orange part is the reflector, and the front is actually transparent. Perhaps you can cover the back of the bulb to reduce the light hitting the orange part? Long shot tho.

[–] DominicHillsun 2 points 1 year ago (1 children)

Honestly I am unsure whats exactly going on inside, it seems to me I will have to somehow source the clear turn signals.

As for the filter, if I manage to overpower it using blue LED's, in theory it should be white/blueish, just depends how well (or in this case bad) it filters, right?

[–] [email protected] 1 points 1 year ago

I think you should find a way to try it - even if it’s just to convince yourself it won’t work! Perhaps take the bulb out and just shine some blue light in there to see what happens.

I don’t know whether it’ll look blue or orange or greenish or muddy and dull (depends on the filter and the bulb) but it sure as fuck won’t look white :)

If the orange is only on the reflector, and the front of the bulb shines straight out through the transparent part then you might be able to block the light coming from the back of the bulb (in fact blue might work for that), but if there’s more complicated optics going on I don’t know what you can do. It’s just not very possible to get white light out if most of it goes through an orange filter or reflects off an orange surface.

[–] [email protected] 2 points 1 year ago* (last edited 1 year ago)

I have a similar problem. I have an 85 bluebird. One of the corner light lenses fell off. The only replacement light I can find is orange whereas mine was two tone, mostly clear.

Can't find one anywhere, so for the moment I'm using a translucent piece of PLA which I melted to shape in hot water, but it's not exactly an ideal solution.

In your case it looks like the front is clear and it's only the reflector at the back which is orange. In which case, finding a silver paint and with the aid of a syringe, carefully adding it through the bulb hole and tilting the body until the orange is covered by silver.. Would that work?

[–] s6original 1 points 1 year ago (1 children)

I don't know if Amazon is an option in your country but they do sell aftermarket replacements for your vehicle.

[–] DominicHillsun 1 points 1 year ago

This is worst case scenario, but will keep in mind

load more comments
view more: next ›