Printed button details for good engagement and function are hard. Didn't have an ideal wiring multi conductor available. Solid proje is maturing well with 2 years of dust.
OMG this is my shi
this post was submitted on 07 Aug 2024
19 points (100.0% liked)
Unfinished Proje
98 readers
1 users here now
This is the graveyard of unfinished proje
the holy land of unwholely leet
This is a place for your vibrant work of progre...
Glory to the unshared,
to the dreams turned embarras...
To the moldy napkin thot,
that plant you forgot;
this is a place for spins, (when it shouldn't),
When the glass half full is a leak
any kind of un can be proje
If #todo you finish,
erors u fix,
proje you complet
GOOD 4U!
#todo write rules about not being an ass 4 code of conduct
(moderation policy light and invisible, you see something - flag it, this is your community first - a mod is just the lazy janit...
founded 3 months ago
MODERATORS
how do you solder it
I have several soldering irons; if you're joking about soldering for a soldering iron.
If you mean, with the stuff pictured, that is just my old hot air rework setup. It is basically a heat gun in that handle. There are nozzle tips that go on the end to direct hot air across various packages. It is the basic setup for surface mounted solder reflow using solder paste. It is also how you remove basic Ball Grid Array chips (the surface mounted chips without pins). It won't take off all surface mounted chips without damaging them. You have to use the hotair gun and a special hotplate that preheats the back side of the board too.
This thing was made to fit my entire soldering station hardware and hot air gun into one unit. There are a bunch of other little integrated features I got carried away designing too.