this post was submitted on 23 Jul 2024
28 points (96.7% liked)

PC Master Race

15006 readers
98 users here now

A community for PC Master Race.

Rules:

  1. No bigotry: Including racism, sexism, homophobia, transphobia, or xenophobia. Code of Conduct.
  2. Be respectful. Everyone should feel welcome here.
  3. No NSFW content.
  4. No Ads / Spamming.
  5. Be thoughtful and helpful: even with ‘stupid’ questions. The world won’t be made better or worse by snarky comments schooling naive newcomers on Lemmy.

Notes:

founded 2 years ago
MODERATORS
_MoveSwiftly
Brunbrun6766
IowaMan
BobaFett26
The_Vampire
Fudgeknuckles98
CatZoomies
[email protected]
[email protected]
28
SSD read speed reduced to half in a year (lemmy.zip)
submitted 4 months ago* (last edited 4 months ago) by [email protected] to c/pcmasterrace
10 comments fedilink hide all child comments
 

Last year I built an AM5 PC with x670e board and installed 2x gen4 ssds and 1 gen3 from different OEMs.

Today I installed another gen4 and ran benchmark on all drives. To my surprise all the old ssds read speed is down by 30-60% from last result, write speed is similar to specs. I am unable to figure out what is wrong with them all drives are showing 98-99% of spare.

top 10 comments
sorted by: hot top controversial new old
[–] [email protected] 13 points 4 months ago (1 children)

Look up your owners manual and go to the section on the pcie/m.2 configuration. See what slots run at what speeds, and use what pcie lanes.

Your CPU has X pcie lanes and you're able to use all of them. Your chipset also has X pcie lanes, but some are used for the USB ports, some for sata ports, etc. If you put the SSD into a slot that's already maxed out on pcie lanes then it's probably going to drop the lane count of multiple things down (the process isn't super smart).

My desktop has the two x16 slots connected directly to the CPU, and 2 of the M.2 slots are connected to the CPU. If I install just my GPU and just my main SSD I run at full speed, but if I add a second M.2 SSD my GPU drops to x8 speeds. I think there's a 3rd slot hidden away that's on the chipset.

[–] [email protected] 2 points 4 months ago

So there are 28x PCIe Gen 5 (24 usable) 16 lanes for GPU, 4 for m.2 and 4 shared with chipset

Additionally 12x PCIe gen4 and 4 Gen3 lanes.

All ssds are running in x4 mode

[–] [email protected] 8 points 4 months ago

Do the slots share lanes?

If you remove the last drive and try again is it any faster?

[–] [email protected] 3 points 4 months ago* (last edited 4 months ago)

My motherboard has two M.2 slots, but they share a PCIE gen3 lane.

If I put SSDs in both, and they are both NVME, (I could put a sata SSD in one of them) they both drop down to gen2 speeds as the lane gets bifurcated in order for both slots to work at the same time.

In my case, my mother board manual actually DOESN'T mention this, so I had to find out the hard way when I plonked in a second drive. I did check when I bought the mobo because I knew this is common, but oh well.

[–] Blaster_M 2 points 4 months ago (1 children)

What's the make and model of the things?

[–] [email protected] 2 points 4 months ago (1 children)

WD Black SN770 (down to ~3300 mb/s) Crucial P3 (most affected) Sabrent R4 (least affected)

[–] Blaster_M 1 points 4 months ago (1 children)

None of these drives are problem drives iirc.... if anything, how full are the drives percentagewise?

[–] [email protected] 1 points 4 months ago (1 children)

WD is boot drive and remaining are for storing AAA titles. They gets full but I uninstall games after completing it but most of the time they are filled to 70-80%.

[–] Blaster_M 4 points 4 months ago

I've noticed that performance starts slowing down when you get near full on these drives sometimes.

[–] raldone01 1 points 4 months ago* (last edited 4 months ago)

Which os are you running?

Try to partition it with free space at the end and see if it makes a difference.

Try to trim the drive and see if it speeds up again.

Do you use any disk encryption?