This is a community dedicated to discussion around historical arms, mechanically unique arms, and Ian McCollum's Forgotten Weapons content. Posts requesting an identification of a particular gun (or other arm) are welcome.
https://www.youtube.com/@ForgottenWeapons
https://www.forgottenweapons.com/
Rules:
1) Treat Others in a Civil Manner. This is not the place to deride others for their race, sexuality, or etc. Personal insults of other members are not welcome here. Neither are calls for violence.
2) No Contemporary Politics Historical politics that influenced designs or adoption of designs are excluded from this rule. Acknowledgement of existing laws to explain designs is also permissable, so long as comments aren't in made to advocate or oppose a policy. Let's not make this a place where we battle over which color ties our politicians should have, or the issues of today.
3) No Advertising This rule doesn't apply to posting historical advertisements or showing more contemporary ads as a means of displaying information on an appropriate topic. The aim of this rule is to combat spam/irrelevant advertising campaigns.
4) Keep Post on Topic This rule will be enforced with leeway. Just keep it related to arms or Forgotten Weapons or closely adjacent content. If you feel you have something that's worth posting here that isn't about either of those (and doesn't violate other rules) feel free to reach out to a mod.
5) No NSFW Content Please refrain from posting uncensored extreme gore or sexualized content. If censored these posts may be fine.
Post Guide Lines
These are suggestions not rules.
-Provide a duration for videos. eg. [12:34]
-Provide a year to either indicate when a specific design was produced, patented, or released. If you have an older design being used in a recent conflict provide the year the picture was taken. Dates should be included to help contextualize, not necessarily give exact periods.
-Post a full URL, on mobile devices it can be hard to tell what you're clicking on if you only see "(Link)".
-Posts do not have to be just firearms. Blades, bows, etc. are also welcome.
Adjacent Communities
If you run a community that you feel might fit in dm a mod and we might add your's.
Want to Find a Museum Near You? Check out the mega thread: https://lemmy.world/post/9699481
For the metrically inclined:
40 inches = 1.016 meters
25 yards = 22.85 meters
40 yards = 36.576 meters
1 inches = 0.0254 meters or 2.54 centimeters
1 yard = 0.9144 meters
Sorry I don't know anything about guns, but is this the barrel getting smaller right at the end? What would happen if you were to fire a solid slug?
Nothing good. It would damage the choke and possibly banana peel the barrel.
Chokes are removable, and it would be advised to remove them for shooting a slug.
Not all chokes are removeable. If you do have a modular choke you'll damage your gun faster firing without a choke tube in place faster than by firing slugs through a full choke. They make thin wall choke tubes if you want to have an open choke with a modular choke system. From my admittedly 2nd hand knowledge rifled slugs through full choke is safe, but generally inaccurate.
Yup, I have shot slugs from choked barrels on many occasions and it works just fine. Some shotguns shoot rifled slugs a little better with a modified choke than a cylinder choke.
Yes they get a bit smaller at the end to reduce the spread.
Bullets are quite malleable and it’s normal for them to deform a bit during firing. Bullets for non-shotguns typically get forced down a bit in the forcing cone before being deformed to fit the grooves in the rifling.
“Rifled” lead shotgun slugs have these grooves around the outside that allow them to deform down to a smaller diameter. You can shoot them through a choked shotgun barrel just fine.
Brother do you sig fig?
What shot size though? Or doesn't it really matter, more just a difference in the spread within the spread and a difference in strength of impact?
The particular combination of barrel and shot matters. Even different brands of similar shot, or different shotguns of the same make/model, can have differences.
The chart above is just a general guideline, it’s often recommended to pattern your specific combination to know firsthand how it performs.
I've got a pretty decent feel for what I use, but haven't ever put it on a target, but I guess I was trying to point out that the chart is somewhat arbitrary without listing a common shot size
Would the spread with the cylinder choke also be indicative of the accuracy of a muzzle loading smooth bore musket?
To a degree yes, for that you'd ideally want a uniform barrel. But then again you don't have rifling, so you're already not on a great foot.
Not having standardized decimal indicators in maths really took me for a ride.
Agreed! It's confusing when most of the world uses "," as a decimal indicated but some countries use "." for that.
Is your existence just to complain about insignificant things in otherwise interesting content? Sounds miserable.
Yeah that would sound miserable. Kinda didn't complain tho just pointed it out bc I first read it as 1016m. See to complain I would need to explicitly say I am unhappy or that this would need to change. I just pointed out that due to me having a different understanding of decimal indication I was confused for a second.
You know what would be miserable tho? Misinterpreting a comment and then jumping to a conclusion about another person's happiness. Go out. Touch some grass. Think about why you so quickly came to such a negative conclusion. Get happy. ✌️
It's definitely not just for the one comment rofl. It's a special kind of person to make two top-level posts complaining about a meme.
You must know.