You would need a pcb with matching mounting style, and with a jst connector for the daughter board - will be tough. That said, you should be able to use the board without the BT, just don't install a battery and use 100% wired as you want.
this post was submitted on 13 Jul 2023
8 points (100.0% liked)
Mechanical Keyboards
8878 readers
12 users here now
Are you addicted to the clicking sounds of your beautiful and impressive mechanical keyboard?
If so, this community is for you!
Here you can discuss everything about mechanical keyboards (and only mechanical keyboards).
Banner by Jay Zhang on Unsplash
founded 4 years ago
Thank you for the reply. I thought about that, but I think the BT is on the main PCB, so as long as it has power, the BT will be on (wired or wireless). At least as I understand it.
You're right. I had a brainfart and confused that bt function would be disabled without battery. And you wanted a hard switch, sorry.
No worries :)
For the Zoom TKL I know it isn't compatible with standard h87 pcbs as the USB port is in the center of the board. The h87nu might work but I'm not sure if it would physically conform to the case dimensions. Plus you would need the daughter-board for the 87nu which also might not have a spot in the case. Best case would be to ask in their discord and see if someone knows or can do a test fit.
Or just wait for round 2 of the Zoom TKL, Wuque usually comes out with more PCBs on product updates like with the ikki68.