this post was submitted on 05 Jul 2023
6 points (100.0% liked)

Welding

111 readers
1 users here now

founded 2 years ago
MODERATORS
Three_word_reply
6
welding nuts to steel tube (self.welding)
submitted 2 years ago by Thorndike to c/welding
3 comments fedilink hide all child comments
 

I need to weld some nuts to a steel tube. Are there any issues with using regular zinc coated nuts or are there other, plain steel nuts I should be using?

top 3 comments
sorted by: hot top controversial new old
[–] LeftBoobFreckle 3 points 2 years ago

Zinc fumes are toxic so you should clean or grind it off before welding

[–] [email protected] 2 points 2 years ago

They should weld just fine. If you are using a mig you may want to grind some of the coating off where you are welding if you get and holes in your weld. Keep it ventilated well, zinc smoke will fuck you up.

[–] [email protected] 1 points 2 years ago

I do this a lot at work. It's not easy to weld galved steel, so either grind/sand off the zinc on the nut (not the easiest to do if they're small!) or use a plain steel nut. If the tube is galved, sand the galv off that too around the area of the weld.

The fumes from zinc are toxic so wear a mask and weld in a well ventilated area.