Electrical and Computer Engineering

844 readers

1 users here now

Electrical and computer engineering (ECE) community, for professionals and learners. Discuss ECE related topics here, for instance digital design, signal processing, circuit analysis, electromagnetics, microelectronics, power electronics, RF electronics, etc.

founded 1 year ago

MODERATORS

phreedf

dragontamer

Am I completely fucked or is this fixable? (lemmy.dbzer0.com)

submitted 7 months ago by [email protected] to c/ece

17 comments fedilink hide all child comments

I don't care what's it gonna take. I just want a connection. I guess I can connect the VCC to another voltage source, but I have the same thing happened to TX on another circuit board, although that one can "flip" (it is still attached marginally... at one end).

Board: T Deck Lilygo.

you are viewing a single comment's thread
view the rest of the comments

[–] [email protected] 1 points 7 months ago* (last edited 7 months ago) (1 children)

goes to a "via"? Meaning it's not directly to the ESP? Is the schematic I provided not what it seems?

rather than try and hook up to the trace.

well I never said I'd hook it up to the trace, right? Or am I misunderstanding?

[–] [email protected] 2 points 7 months ago (1 children)

So, let me explain. The trace that breaks from the VCC of the P8 IC goes up and to and through a few holes. Those holes lead into the the board to get the needed 3V. You can also go bodge wire from the VCC leg of the P8 direct to the pin 2 of the ESP. You are reading the schematic correctly.

[–] [email protected] 1 points 7 months ago (1 children)

so if I understand correctly, I can either use a pin to solder a bodge wire onto, or solder a bodge wire directly onto the ESP? Hmm then I rather opt for the ESP since this has a larger area to solder onto than the pin.

[–] [email protected] 1 points 7 months ago

Yes, bodge wire from the leg of the IC with the busted VCC pad to the 3V leg of the ESP as laid out in the document.