this post was submitted on 27 Mar 2024
1292 points (98.1% liked)

linuxmemes

21206 readers
78 users here now

Hint: :q!

Sister communities:

Community rules (click to expand)

1. Follow the site-wide rules

2. Be civil
  • Understand the difference between a joke and an insult.
  • Do not harrass or attack members of the community for any reason.
  • Leave remarks of "peasantry" to the PCMR community. If you dislike an OS/service/application, attack the thing you dislike, not the individuals who use it. Some people may not have a choice.
  • Bigotry will not be tolerated.
  • These rules are somewhat loosened when the subject is a public figure. Still, do not attack their person or incite harrassment.
    • 3. Post Linux-related content
  • Including Unix and BSD.
  • Non-Linux content is acceptable as long as it makes a reference to Linux. For example, the poorly made mockery of sudo in Windows.
  • No porn. Even if you watch it on a Linux machine.
    • 4. No recent reposts
  • Everybody uses Arch btw, can't quit Vim, and wants to interject for a moment. You can stop now.

    • Please report posts and comments that break these rules!

    founded 1 year ago
    MODERATORS
    poopsmith
    zephyr
    rtxn
    1292
    Asking a Linux user to recommend a printer (tesseract.dubvee.org)
    submitted 7 months ago by [email protected] to c/linuxmemes
    268 comments fedilink hide all child comments
     

    BTW, I've had my Brother laser MFP for 11 years and still on the original toner.

    you are viewing a single comment's thread
    view the rest of the comments
    [โ€“] [email protected] 4 points 7 months ago (1 children)

    I used to have a Samsung laser for quite a few years. Went through maybe three toner cartridges. Eventually it started slipping and I didn't bother finding out if there's a repair available and bought a brother laser instead. Worked pretty great otherwise.

    Haven't tried toner transfer on this, but regular printouts are fine and it's much faster.

    [โ€“] ChunkMcHorkle 1 points 7 months ago

    Eventually it started slipping

    If you still have the printer (you may not but I'm going to put this out there for others too) that sounds like a simple roller replacement, and rollers/pickup pads are usually considered "consumables" instead of "parts" because they all wear out over time. This is true for most if not all consumer printers, ink and laser alike.

    Replacements should be pretty easy to find for even old printers, and the installation is usually pretty straightforward. Last year I was still able to buy a roller replacement set for a 19 year old HP, and it took me ten minutes and one Phillips head screwdriver to replace them all.

    You can also just take out and clean the hell out of anything rubber with isopropyl alcohol, letting it dry thoroughly and then putting it back in, or if possible rotate the rubber on it to present an unused side, I've done all that a few times too.

    For pretty much any model printer, search on the printer model number and "maintenance kit" to find available roller/pickup pad replacements for sale, and printer model number plus "service manual" to get replacement instructions if you need them.