Linux

48655 readers

395 users here now

From Wikipedia, the free encyclopedia

Linux is a family of open source Unix-like operating systems based on the Linux kernel, an operating system kernel first released on September 17, 1991 by Linus Torvalds. Linux is typically packaged in a Linux distribution (or distro for short).

Distributions include the Linux kernel and supporting system software and libraries, many of which are provided by the GNU Project. Many Linux distributions use the word "Linux" in their name, but the Free Software Foundation uses the name GNU/Linux to emphasize the importance of GNU software, causing some controversy.

Rules

Posts must be relevant to operating systems running the Linux kernel. GNU/Linux or otherwise.
No misinformation
No NSFW content
No hate speech, bigotry, etc

Related Communities

Community icon by Alpár-Etele Méder, licensed under CC BY 3.0

founded 5 years ago

MODERATORS

[email protected]

181

Linux users with uncommon or unusual setups: tell us about it (lemmy.ml)

submitted 9 months ago by [email protected] to c/[email protected]

176 comments fedilink hide all child comments

I'll start with mine. yes part of this was to brag about my somewhat but not too unusual setup. But I also wanna learn from your setups!

Anyways: I primarily use Gentoo Linux.

I have two headless servers: a Raspberry Pi 4B and a Oracle cloud VM (free tier). Both running OpenRC, and both were running mainline kernel with custom config (I recently switched the Pi to PiFoundation kernel due to some issues). The raspberry pi boots from SSD and has no sd card inserted.

Both servers were running musl libc instead of glibc for a while. This gave me a couple of random issues, but eventually I got tired and switched back to glibc.

I have a desktop running gentoo and a laptop running arch, but hoping to switch the laptop to gentoo soon.

Both are daily driving wayland (the desktop had nvidia card and used for gaming). The desktop is running a kernel with a minimal config that compiles in 2-3 minutes.

What's your unusual setup like?

you are viewing a single comment's thread
view the rest of the comments

[–] ichbinjasokreativ 9 points 9 months ago (1 children)

I have a laptop with an easily accessible m.2 slot, which I use with an m.2 to pcie x16 adapter to connect an external desktop grapics card to game and run ai. apart from that, a diy nas running opensuse and a couple vms for dns, remote nas access, etc

[–] [email protected] 1 points 9 months ago (1 children)

Damn I need to find out if that works on my machine.

[–] ichbinjasokreativ 1 points 9 months ago

These adapters only exist for pcie 3.0 and m.2 slots for ssds have 4 lanes at best, so you should expect performance to be between thunderbolt 4 and a full x16 slot in a desktop, but it's been working very reliably for me and is absolutely faster than the iGPU in my laptop. You do typically need a desktop power supply connected to the adapter though, but since it only needs to power the card, it's fine to go with a lower power one.