this post was submitted on 23 Mar 2024
171 points (97.2% liked)
Asklemmy
44125 readers
668 users here now
A loosely moderated place to ask open-ended questions
Search asklemmy ๐
If your post meets the following criteria, it's welcome here!
- Open-ended question
- Not offensive: at this point, we do not have the bandwidth to moderate overtly political discussions. Assume best intent and be excellent to each other.
- Not regarding using or support for Lemmy: context, see the list of support communities and tools for finding communities below
- Not ad nauseam inducing: please make sure it is a question that would be new to most members
- An actual topic of discussion
Looking for support?
Looking for a community?
- Lemmyverse: community search
- sub.rehab: maps old subreddits to fediverse options, marks official as such
- [email protected]: a community for finding communities
~Icon~ ~by~ ~@Double_[email protected]~
founded 5 years ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
The water characteristics you're worried about sound like aesthetic problems, which might be displeasing but pose no real health risks. These vary significantly between public water systems. If the system pulls from surface water, the water might need more treatment in the dry season since contaminants concentrate in surface waters more that time of year. I'm lucky to live somewhere that has no noticeable taste/odor/color issues. For places that do, you should be able to drink it from tap without issue, but it might taste/smell better if you run it through a filter or even just let it sit in a pitcher in the fridge.
If a municipality were to cut corners with their water treatment in a similar way to the asphalt plant you mentioned (which sounds kinda shady btw), people would get sick and potentially die. Most municipalities are very risk averse and take liability seriously to avoid litigation/losing money. So, it's not impossible, but I think it'd be unlikely for a city to skimp on water treatment just to save a few bucks. Water treatment facilities are also required to constantly test for things like pH, turbidity, and chlorine residual and report to the state, so it's not as simple as hiding things from an inspector the day of.
The asphalt company is basically all of Los Angeles' roads. They came up with a way to use recycled asphalt grindings in a MUCH higher percentage of the mix in a process that involved soaking it with diesel fuel for a specific amount of time and mixing it. The loader operator feeding the plant had just enough down time to do the soak and mixing process. This recycled grindings mix was added to the hot aggregate strait out of the drum burner right at the liquid asphalt mixing point. If I recall correctly (after two decades), the allowed limit for recycle was 15% according to the state, but they were able to run between 30%-45% recycle with their methods and it was undetectable in the company engineering test lab. You be the judge of how that falls into corruption versus innovation.
Interesting, thanks for the context. I don't know anything about asphalt, but if it didn't cause any health or safety issues I'd place it on the innovation end of the spectrum. I'd be interested in things like how the spent diesel fuel was disposed of and if any petro chems would leach into stormwater from asphalt made this way.
Diesel fuel is the primary solvent of the liquid "AC" they called it aka the black stuff. For instance, you get any hot AC on you, you're in big trouble because it is super hot, but on your clothing or a spill, the only way to get it cleaned up is with diesel fuel. There are stages of containment around the storage of the stuff. As far as recycle, it is just enough diesel to wet the old AC in the grindings. There is no excess. It has to be wet for the new and old to mix. The operator is wetting the surface well then feeding the aggregate bins for the plant. Each time they feed a bin, they scoop and drop the recycle grindings. Every 4-5 times, they add a scoop to the conveyer bin, put a fresh scoop on the back of the stall, and soak the mix in diesel. The diesel doesn't penetrate very deep and the point is to keep it consistent. That area is in the second containment zone for AC, so it is not a part of the groundwater environment. Spending a fortune on wasted diesel is also not the point. Feeding the plant is a monotonous routine. Dialing in these kinds of this is all the mental stimulation there is really. The whole job is, service the machine as needed, don't spin the tires, and NEVER let a aggregate bin go empty or put the wrong class in the wrong bin.