Cars - For Car Enthusiasts

3954 readers

10 users here now

About Community

c/Cars is the largest automotive enthusiast community on Lemmy and the fediverse. We're your central hub for vehicle-related discussion, industry news, reviews, projects, DIY guides, advice, stories, and more.

Rules

Stay respectful to the community, hold civil discussions, even when others hold opinions that may differ from yours.

This is not an NSFW community, and any such content will not be tolerated.

Policy, not politics! Policy discussions revolve around the concept; political discussions revolve around the individual, party, association, etc. We only allow POLICY discussions and political discussions should go to c/politics.

Must be related to cars, anything that does not have connection to cars will be considered spam/irrelevant and is subject to removal.

founded 1 year ago

MODERATORS

BallShapedMan

RightHandOfIkaros

Trailer brake circuit breaker advice. (self.cars)

submitted 8 months ago by Machinist to c/cars

12 comments fedilink hide all child comments

We're preparing to move about 1000mi.

I'm getting my truck ready to tow a trailer for our three potbelly pigs, two cats and a dog.

'98 Ranger XLT with 4.0L V6, auto trans. Rated for 5900lbs tow, 9500 gross. Even has the overdrive disable and good rear end ratio.

I'm adding a Redarc Liberty brake control. The 7-way plug kit I got includes 30 and 40 amp auto reset breakers for the control and trailer power.

Here's the thing. I don't like the idea of an automatically resetting breaker at 30 amps or more due to the risk of fire or frying the electronics in my truck. I would prefer to install manual reset breakers. I understand that an auto reset might allow some brake capability in the event of a short and that is why they are used. I just don't feel like the auto breaker justification is that likely vs the other risks of auto breakers.

How long does it take the auto breakers to reset?

What are the real world risks using manual reset breakers?

Opinions/thoughts greatly appreciated!

you are viewing a single comment's thread
view the rest of the comments

[–] [email protected] 4 points 8 months ago (1 children)

I would strongly recommend wiring the negative directly to the battery. It is the easiest way to avoid ground issues especially with larger loads.

Can not comment on the breakers as I have no experience with them.

[–] Machinist 2 points 8 months ago

I will do so. Thanks!