Technology

59974 readers

3505 users here now

This is a most excellent place for technology news and articles.

Our Rules

Follow the lemmy.world rules.
Only tech related content.
Be excellent to each another!
Mod approved content bots can post up to 10 articles per day.
Threads asking for personal tech support may be deleted.
Politics threads may be removed.
No memes allowed as posts, OK to post as comments.
Only approved bots from the list below, to ask if your bot can be added please contact us.
Check for duplicates before posting, duplicates may be removed

Approved Bots

founded 2 years ago

MODERATORS

461

Why Charging Your Gadgets Over 80% Is Such a Bad Idea | iFixit News (www.ifixit.com)

submitted 10 months ago by [email protected] to c/technology

258 comments fedilink hide all child comments

you are viewing a single comment's thread
view the rest of the comments

[–] sagrotan 3 points 10 months ago (1 children)

I don't know, I have a bunch of years old Sony Konion vtc5 and vtc6 18650s, they're constantly loaded and drained, I guess some have thousands of cycles. Of course, they're not new anymore, but even my oldest ones, 7 years plus, are ok. They still give 34 ampere for quite some time, so no problems here. Got some even older no-name ones in akku packs, 10 years old, not so many cycles, no problems there either. Maybe because I never charged them quickly and with adaptive voltage?!?

[–] MeanEYE 3 points 10 months ago* (last edited 10 months ago)

There are 18650 batteries with protection circuit and without. It's basically over-charge, under-charge and high temperature protection. More info. When charging any battery higher voltage means faster charge and it's usually not a problem. What is a problem is heat generated. If you can't dissipate heat fast enough, then you have a potential problem. Slower charging is always safer.

And all charging processes are adaptive voltage to a degree. Say you are charging 18650. Your charger will start with target voltage and constant current at 500mA, and watch the voltage in the battery raise. Once voltage reaches target it will remain constant but charge current will slowly drop. Once there's no current going in, battery is full at that voltage level. Some chargers will push more current in, some will try higher voltage initially then switch to target voltage. Higher current can be a problem due to chemistry stability and heat but higher voltage should generally be safe. You can even revive some of the old batteries that no longer have any charge by shocking them with higher voltage shortly.

Also, good charger matters a lot.