PC Master Race

15280 readers

541 users here now

A community for PC Master Race.

Rules:

No bigotry: Including racism, sexism, homophobia, transphobia, or xenophobia. Code of Conduct.
Be respectful. Everyone should feel welcome here.
No NSFW content.
No Ads / Spamming.
Be thoughtful and helpful: even with ‘stupid’ questions. The world won’t be made better or worse by snarky comments schooling naive newcomers on Lemmy.

Notes:

PCMR Community Name - Our Response and the Survey

founded 2 years ago

MODERATORS

Having troubles getting windows to work on new NVME. (self.pcmasterrace)

submitted 11 months ago* (last edited 11 months ago) by Alpha71 to c/pcmasterrace

11 comments fedilink hide all child comments

OK, so my first NVME was a cheap Kingston 2 TB drive. Not very good. So I just bought a new WD Black SN850X. tried doing a fresh install of windows. didn't work. said 'fuck it' and cloned my Kingston to the WD.

Now when I try booting off of the WD my BIOS detects it, but when i try to select it to boot from it doesn't show up. only my old Kingston shows up.

Motherboard is a Gigabyte Z790 UD AC.

tried switching drive letters. didn't work.

At wits end. Any suggestions?

Edit: sort of figured it out.

Pro tip, make sure your USB drive is formatted to the same file system as your nvme is.

First attempt was with a fat32 usb. This is what caused the problem.

Used a different USB formatted to ntsf. Seemes to be working now. Hopefully i will be anle to install windows now

you are viewing a single comment's thread
view the rest of the comments

[–] Presi300 3 points 11 months ago (1 children)

Nah, your problem was probably not with your file system, you probably created the windows boot USB with a legacy MBR partition table, instead of a GPT one.

[–] Alpha71 1 points 11 months ago

either way windows is installed on the new drive now.