I've spent some time searching this question, but I have yet to find a satisfying answer. The majority of answers that I have seen state something along the lines of the following:
- "It's just good security practice."
- "You need it if you are running a server."
- "You need it if you don't trust the other devices on the network."
- "You need it if you are not behind a NAT."
- "You need it if you don't trust the software running on your computer."
The only answer that makes any sense to me is #5. #1 leaves a lot to be desired, as it advocates for doing something without thinking about why you're doing it -- it is essentially a non-answer. #2 is strange -- why does it matter? If one is hosting a webserver on port 80, for example, they are going to poke a hole in their router's NAT at port 80 to open that server's port to the public. What difference does it make to then have another firewall that needs to be port forwarded? #3 is a strange one -- what sort of malicious behaviour could even be done to a device with no firewall? If you have no applications listening on any port, then there's nothing to access. #4 feels like an extension of #3 -- only, in this case, it is most likely a larger group that the device is exposed to. #5 is the only one that makes some sense; if you install a program that you do not trust (you don't know how it works), you don't want it to be able to readily communicate with the outside world unless you explicitly grant it permission to do so. Such an unknown program could be the door to get into your device, or a spy on your device's actions.
If anything, a firewall only seems to provide extra precautions against mistakes made by the user, rather than actively preventing bad actors from getting in. People seem to treat it as if it's acting like the front door to a house, but this analogy doesn't make much sense to me -- without a house (a service listening on a port), what good is a door?
now i have the feeling as if there might be a misunderstanding of what "ports" are and what an "open" port actually is. Or i just dont get what you want. i am not on your server/workstation thus i cannot even try to connect TO an external service "from" your machine. i can do so from MY machine to other machines as i like and if those allow me, but you cannot do anything against that unless that other machine happens to be actually yours (or you own a router that happens to be on my path to where i connect to)
lets try something. your machine A has ssh service running my machine B has ssh and another machine C has ssh.
users on the machines are a b c , the machine letters but in small. what should be possible and what not? like: "a can connect to B using ssh" "a can not connect to C using ssh (forbidden by A)" "a can not connect to C using ssh (forbidden by C)" [...]
so what is your scenario? what do you want to prevent?
accomplish control (allow/block/report) over who or what on my machine can connect to the outside world (using http/s) and to exactly where, but independant of ip addresses but using domains to allow or deny on a per user/application + domain combonation while not having to update ip based rules that could quickly outdate anyway.
This is most likely a result of my original post being too vague -- which is, of course, entirely my fault. I was intending it to refer to a firewall running on a specific device. For example, a desktop computer with a firewall, which is behind a NAT router.
What is your example in response to? Or perhaps I don't understand what it is attempting to clarify. I don't necessarily have any confusion regarding setting up rules for known and discrete connections like SSH.
Are you referring to an application layer firewall like, for example, OpenSnitch?
so here are some reasons for having a firewall on a computer, i did not read in the thread (could have missed them) i have already written this but then lost the text again before it was saved :( so here a compact version:
one side quest example i stumbled upon: imagine an attacker has ccompromised the vendor of a software you use on your machine. this software connects to some port eventually, but pings the target first before doing so (whatever! you say). from time to time the ping does not go to the correct 11.22.33.44 of the service (weather app maybe) but to 0.11.22.33 looks like a bug you say, never mind.
could be something different. pinging an IP that does not exist ensures that the connection tracking of your router keeps the entry until it expires, opening a time window that is much easier to hit even if clocks are a bit out of sync.
also as the attacker knows the IP that gets pinged (but its an outbound connection to an unreachable IP you say what could go wrong?)
lets assume the attacker knows the external IP of your router by other means (i.e. you've send an email to the attacker and your freemail provider hands over your external router address to him inside of an email received header, or the manipulated software updates an dyndns address, or the attacker just guesses your router has an address of your providers dial up range, no matter what.)
so the attacker knows when and from where (or what range) you will ping an unreachable IP address in exact what timeframe (the software running from cron, or in user space and pings at exact timeframes to the "buggy" IP address) Then within that timeframe the attacker sends you an icmp unreachable packet to your routers external address, and puts the known buggy IP in the payload as the address that is unreachable. the router machtes the payload of the package, recognizes it is related to the known connection tracking entry and forwards the icmp unreachable to your workstation which in turn gives your application the information that the IP address of the attacker informs you that the buggy IP 0.11.22.33 cannot be reached by him. as the source IP of that packet is the IP of the attacker, that software can then open a TCP connection to that IP on port 443 and follow the instructions the attacker sends to it. Sure the attacker needs that backdoor already to exist and run on your workstation, and to know or guess your external IP address, but the actual behaviour of the software looks like normal, a bit buggy maybe, but there are exactly no informations within the software where the command and control server would be, only that it would respond to the icmp unreachable packet it would eventually receive. all connections are outgoing, but the attacker "connects" to his backdoor on your workstation through your NAT "Firewall" as if it did not exist while hiding the backdoor behind an occasional ping to an address that does not respond, either because the IP does not exist, or because it cannot respond due to DDos attack on the 100% sane IP that actually belongs to the service the App legitimately connects to or to a maintenance window, the provider of the manipulated software officially announces. the attacker just needs the IP to not respond or slooowly to increase the timeframe of connecting to his backdoor on your workstation before your router deletes the connectiin tracking entry of that unlucky ping.
if you don't understand how that example works, that is absolutely normal and i might be bad in explaining too. thinking out of the box around corners that only sometimes are corners to think around and only under very specific circumstances that could happen by chance, or could be directly or indirectly under control of the attacker while only revealing the attackers location in the exact moment of connection is not an easy task and can really destroy the feeling of achievable security (aka believe to have some "control") but this is not a common attack vector, only maybe an advanced one.
sometimes side quests can be more "informative" than the main course ;-) so i would put that ("learn more", not the example above) as the main good reason to install a firewall and other security measures on your pc even if you'ld think you're okay without it.
Never mind, and i got distracted and carried away a bit from your question by the course the messages had taken
i thought it could possibly help clarifying something, sort of it did i guess.
no, i do not conside a proxy like squid to be an "application level firewall" (but i fon't know opensnitch however), i would just limit outbound connections to some fqdn's per authenticated client and ensure the connection only goes to where the fqdns actually point to. like an atracker could create a weather applet that "needs" https access to f.oreca.st, but implements a backdoor that silently connects to a static ip using https. with such a proxy, f.oreca.st would be available to the applet, but the other ip not as it is not included in the acl, neither as fqdn nor as an ip. if you like to say this is an application layer firewall ok, but i dont think so, its just a proxy with acls to me that only checks for allowed destination and if the response has some http headers (like 200 ok) but not really more. yet it can make it harder for some attackers to gain the control they are after ;-)