this post was submitted on 02 Jul 2023
52 points (96.4% liked)

homeassistant

12278 readers
291 users here now

Home Assistant is open source home automation that puts local control and privacy first. Powered by a worldwide community of tinkerers and DIY enthusiasts. Perfect to run on a Raspberry Pi or a local server. Available for free at home-assistant.io

founded 2 years ago
MODERATORS
[email protected]
52
Outdoor Temperature Sensor (self.homeassistant)
submitted 2 years ago by GreenBubbleB0y to c/homeassistant
27 comments fedilink hide all child comments
 

I'd like to get an outdoor Temperature Sensor that can be used with HA and Google Home. Anyone have any recommendations?

you are viewing a single comment's thread
view the rest of the comments
[–] [email protected] 2 points 2 years ago (4 children)

There's lots of ways. I've used an Aqara zigbee temp/humidity sensor before which worked fine, just needed protection from rain.

Now I'm using a onewire dallas sensors, along with quiet a few others around the house. They work fine too.

[–] [email protected] 2 points 2 years ago

Same here, esp's and Dallas sensors. Some also have extra sensors like PIR, humidity & light, and some control some led strips too

[–] [email protected] 2 points 2 years ago

Same here, I've been using an aqara ZigBee sensor for more than two years and it works great.

I designed 3d printed rain proof enclosure and it's been reporting outdoor temperature and humidity for more than two years with no problem.

The worst part for me is the changing the battery. The sensor is on a hard to reach place and my design is not the best, so I fear when the battery gets low.

I was planning to build something like this for the rain: https://community.home-assistant.io/t/diy-zigbee-rain-gauge/255379https://community.home-assistant.io/t/diy-zi