this post was submitted on 10 Jan 2024
17 points (94.7% liked)

Buildapc

3791 readers
7 users here now

founded 1 year ago
MODERATORS
17
submitted 10 months ago* (last edited 10 months ago) by MD756 to c/buildapc
 

My MSI MAG Z790 motherboard supports rear channel speakers.

If I were to mount a pair of speakers behind me, that would require approximately 15 feet (4.5 meters) of speaker wire from my PC to the speakers. Do I have to worry about the AUX port’s power output if I were to use 18 or 16 gauge speaker wire?

you are viewing a single comment's thread
view the rest of the comments
[–] glimse 5 points 10 months ago* (last edited 10 months ago) (8 children)

Those are passive speakers that won't work without an amplifier. You need some PC speakers with an aux input

You can't go from 1/8" to speaker wire

[–] MD756 3 points 10 months ago (3 children)

Can’t believe I forgot to include that tidbit, that they’re passive speakers.

Isn’t the motherboard itself the amplifier?

[–] glimse 5 points 10 months ago (2 children)

Unfortunately not, the motherboard only has a preamp. Those ports output a line level signal and the speakers are expecting speaker level which is post-amplification which is a MUCH stronger so it will be extremely quiet - if not completely silent

You can buy a cheap 2ch amp but I think you'd be better off with different speakers. It wouldn't be a bad idea to get a second set of whatever you're using for the front speakers to match the sound profile

[–] MD756 2 points 10 months ago (1 children)

Thanks for the advice. I got a cheap amp, got it all set up, and it works a charm!

[–] glimse 2 points 10 months ago

Nice!! Enjoy your surround sound

load more comments (4 replies)