this post was submitted on 30 Jun 2023
8 points (100.0% liked)

Linux

48640 readers
1447 users here now

From Wikipedia, the free encyclopedia

Linux is a family of open source Unix-like operating systems based on the Linux kernel, an operating system kernel first released on September 17, 1991 by Linus Torvalds. Linux is typically packaged in a Linux distribution (or distro for short).

Distributions include the Linux kernel and supporting system software and libraries, many of which are provided by the GNU Project. Many Linux distributions use the word "Linux" in their name, but the Free Software Foundation uses the name GNU/Linux to emphasize the importance of GNU software, causing some controversy.

Rules

Related Communities

Community icon by Alpár-Etele Méder, licensed under CC BY 3.0

founded 5 years ago
MODERATORS
 

I've been working on my boot time lately, but I realize I really don't have a good handle on what it should be. I am hoping some of you will share yours so we can all get a feel for it. I'm including some HW specs here also because I've heard it can be relevant:

64GB RAM, 2 x 2 TB NVME:

Startup finished in 9.922s (firmware) + 1.151s (loader) + 3.506s (kernel) + 4.006s (userspace) = 18.586s graphical.target reached after 4.003s in userspace.

Edited to add boot time detail

you are viewing a single comment's thread
view the rest of the comments
[–] RegalPotoo 1 points 1 year ago

From cold shutdown, the server takes ~8 minutes by the time the IPMI has initialized, it's probed all the RAM, initialized all the PCIe cards and run their boot ROMs, then actually booted Linux, brought all the RAID arrays online and done all the other stuff. It's another 5-10 minutes until things are actually usable while the containers start. Only gets rebooted every month or so, and I'm usually doing something else while it's happening so it's not a big deal.

Laptop is about a minute, but again, it's in sleep mode most of the time so 95% of the time I'm not waiting for it to boot.