homeassistant

12132 readers

4 users here now

Home Assistant is open source home automation that puts local control and privacy first. Powered by a worldwide community of tinkerers and DIY enthusiasts. Perfect to run on a Raspberry Pi or a local server. Available for free at home-assistant.io

founded 2 years ago

MODERATORS

[email protected]

Zigbee Cluster 0xEF00 (self.homeassistant)

submitted 10 months ago by corroded to c/homeassistant

9 comments fedilink hide all child comments

I've been going through my system logs and working on resolving the miscellaneous errors; mostly it's just due to poorly-written automations where the automation would be called while it was still running. Easy fix.

What I can't seem to fix is a constant stream of "Unknown cluster command" errors on cluster 0xef00 coming from ZHA. I've discovered that the 0xef00 cluster is a manufacturer-specific cluster. All of my errors come from Tuya mmWave sensors; apparently Tuya uses this cluster for inter-device communication.

All of my devices work, but this error is polluting the logs to a large degree; right now it's showing over 100k instances of this error. Is there a way to have HA just ignore this cluster completely? It's not causing any issues with functionality, but I would rather the logs just show actual errors so I can more easily identify problems and fix them.

I've read that Z2MQTT doesn't have this issue, but swapping from ZHA to Z2MQTT is not an option for me, especially for what amounts to a logging issue. It would require re-pairing almost 100 Zigbee devices and modifying nearly every single automation.

you are viewing a single comment's thread
view the rest of the comments

[–] corroded 2 points 10 months ago

When you talk about the limits of ZHA, what are you referring to exactly? It would probably take an entire weekend for me to re-pair all the devices on my Zigbee network, but I'm not completely opposed to the idea of I gain some functionality that I didn't have before.

Based on what I read when I first set up HA, it seems like ZHA was somewhat lacking for quite some time but is now essentially equivalent to Z2MQTT. I went with ZHA because it seemed like the "default" for Zigbee.