this post was submitted on 29 Oct 2023
444 points (98.7% liked)
Technology
60078 readers
4458 users here now
This is a most excellent place for technology news and articles.
Our Rules
- Follow the lemmy.world rules.
- Only tech related content.
- Be excellent to each another!
- Mod approved content bots can post up to 10 articles per day.
- Threads asking for personal tech support may be deleted.
- Politics threads may be removed.
- No memes allowed as posts, OK to post as comments.
- Only approved bots from the list below, to ask if your bot can be added please contact us.
- Check for duplicates before posting, duplicates may be removed
Approved Bots
founded 2 years ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
PoE is 48V. That's high enough to avoid too many losses over wiring distance, but also low enough that it doesn't have to be installed by a licensed electrician.
POE also is point to point, and currently tops out at 30W per link. You could split it off in a socket - but that reduces the available power per device even more.
Or we could use the current AC cabling where we use a single wire over multiple sockets and get a combined 3600W over a standard 16A fuse over 1.5mm2 wire - which with ground and neutral is about the same thickness as a shielded ethernet cable.
PoE type 4 can go to 90W, and this is plenty to power modern lights and charge smartphones and laptops. It has the side effect that smart devices no longer need wifi/zigbee/bluetooth/whatever; they get power and network from one cable.
12/3 romex costs about $200 for 100ft, or the same length of 14/3 for $80. 250ft of solid copper (not copper clad aluminum) cat6a costs around $200. You don't need a licensed electrician for 48V wiring. You may not even need to pull a permit on a retrofit. Very few individual things need more than 90W. We can cut the amount of romex going around way down in exchange for a lot more wired networking ports that have other side benefits than just power.
I've pulled a setup like this in my own house. Fishing a bundle of six cat6 cables through a hole isn't much more difficult than a single romex cable.