bike wrench

837 readers

1 users here now

A place to ask bicycle repair questions, and for bike shop monkeys to share advanced non commercial wrenching resources (no YouTube self promotion). This is only for repair related topics.

[email protected]

founded 2 years ago

MODERATORS

j4k3

Backpedaling causes chain to shift down from lowest cog on 1x8 drivetrain (lemmy.ca)

submitted 2 years ago by [email protected] to c/bikewrench

4 comments fedilink hide all child comments

Hey folks, Im wondering if I should be concerned or if this is normal.

My folding bike (Tern Link D8) has a 1x8 gearset and I've ridden it for over 2600km.

Today while lubing the chain, which I tend to do from the smallest cog while backspinning the pedals, I kept having the chain fall into the second smallest cog.

It happens when spinning fast, but also when it spins slowly.

I've checked the limit screws, and the derailleur barrel knob so things run smoothly when actually pedaling.

I don't recall this happening in previous times I've lubed the chain, and I'm wondering if I should be checking anything else or chalk it up to being normal.

you are viewing a single comment's thread
view the rest of the comments

[–] [email protected] 4 points 2 years ago (1 children)

It sounds like your derailleur is a little misaligned or your cable tension is off then. If you don't ride in that gear (rarely use lowest or highest myself) you may not notice it, but your outside gears are where you'll feel the chain rubbing most frequently due to it being in it's furthest position, or because the tension is highest / lowest. If it doesn't happen at all in your riding sweet spot I wouldn't worry about it but might be worth getting it adjusted at a good lbs. If mine isn't busy they'll usually adjust mine no charge.

[–] [email protected] 2 points 2 years ago

I appreciate that. 👍