this post was submitted on 18 Jun 2023
40 points (100.0% liked)

flashlight

2985 readers
23 users here now

Portable illumination

Rules:

  1. Be excellent to each other
  2. Don't be the reason we need to make more rules

Related:

founded 2 years ago
MODERATORS
Adair21
Zak
40
FW1AA with RGB+reflector (lemmy.world)
submitted 2 years ago* (last edited 2 years ago) by thefreeman to c/flashlight
15 comments fedilink hide all child comments
 

Hello, first post here :D

A few month ago I modded a FW1AA with boost-buck driver for NiMH/li-ion and with RGB LEDs.
I used a TIR lens for the aux led to shine through, unfortunately it had artefacts in the spill that ended up a bit too distracting so I went back to the original reflector and used a thin flex PCB under the reflector with tiny LEDs that fit in the opening. I’m very satisfied with the result, plus the beam with the 519A+ SMO reflector is surprisingly good.

Edit : putting the video in the text since it didn’t create a YouTube thumbnail : https://youtu.be/u6aYa8FEt3s

you are viewing a single comment's thread
view the rest of the comments
[–] zumlin 1 points 2 years ago (6 children)

Yea I don't own one yet, but it should be around 5.6mm to 5.7mm.

I can try making a version with the LEDs closer to the 3535 cutout

That would be great if you could, thanks.

[–] thefreeman 2 points 2 years ago* (last edited 2 years ago) (5 children)
[–] trakcon 1 points 2 years ago (3 children)

So this should work for the original FW1A?? That is exactly what I need!

[–] thefreeman 1 points 2 years ago* (last edited 2 years ago) (1 children)

I guess it should. Unless the corners of the flex boards overlap with the MCPCB solder pads, since it was designed for a smaller MCPCB.

[–] trakcon 1 points 2 years ago

Awesome. I'll order some soon and let you know. Thanks so much!

load more comments (1 replies)
load more comments (2 replies)
load more comments (2 replies)