flashlight

3020 readers

2 users here now

Portable illumination

Rules:

Be excellent to each other
Don't be the reason we need to make more rules

founded 2 years ago

MODERATORS

Adair21

Zak

FW1AA with RGB+reflector (lemmy.world)

submitted 2 years ago* (last edited 2 years ago) by thefreeman to c/flashlight

15 comments fedilink hide all child comments

Hello, first post here :D

A few month ago I modded a FW1AA with boost-buck driver for NiMH/li-ion and with RGB LEDs.
I used a TIR lens for the aux led to shine through, unfortunately it had artefacts in the spill that ended up a bit too distracting so I went back to the original reflector and used a thin flex PCB under the reflector with tiny LEDs that fit in the opening. I’m very satisfied with the result, plus the beam with the 519A+ SMO reflector is surprisingly good.

Edit : putting the video in the text since it didn’t create a YouTube thumbnail : https://youtu.be/u6aYa8FEt3s

you are viewing a single comment's thread
view the rest of the comments

[–] thefreeman 2 points 2 years ago* (last edited 2 years ago)

I don't remember exactly but I probably chose the 0.69mm ones because they cost half as much. The 0.04mm difference being pretty negligible. I also have the 0.9mm ones that I use when the classic 0606 are just a bit too big, they are easier to handle.