Hello, first post here :D
A few month ago I modded a FW1AA with boost-buck driver for NiMH/li-ion and with RGB LEDs.
I used a TIR lens for the aux led to shine through, unfortunately it had artefacts in the spill that ended up a bit too distracting so I went back to the original reflector and used a thin flex PCB under the reflector with tiny LEDs that fit in the opening. I’m very satisfied with the result, plus the beam with the 519A+ SMO reflector is surprisingly good.
Edit : putting the video in the text since it didn’t create a YouTube thumbnail : https://youtu.be/u6aYa8FEt3s
Awesome! Do you think if I can fit these RGB leds under an original FW1A reflector with the smaller opening (not the crappy FW1A Pro reflector)? If I can eventually find one that is.
What's the diameter of the opening ?
Edit :
Oh you don’t have one, measuring from a picture I get 5.9mm, if that’s right then it will be very close.
I can try making a version with the LEDs closer to the 3535 cutout.
Yea I don't own one yet, but it should be around 5.6mm to 5.7mm.
That would be great if you could, thanks.
Circle is 5.6mm :
https://oshpark.com/shared_projects/6tVRn8Ux
Excellent! Thank you so much.
So this should work for the original FW1A?? That is exactly what I need!
looks ok :
I guess it should. Unless the corners of the flex boards overlap with the MCPCB solder pads, since it was designed for a smaller MCPCB.
Awesome. I'll order some soon and let you know. Thanks so much!