this post was submitted on 05 Sep 2023
23 points (96.0% liked)

Asklemmy

44151 readers
1792 users here now

A loosely moderated place to ask open-ended questions

Search asklemmy ๐Ÿ”

If your post meets the following criteria, it's welcome here!

  1. Open-ended question
  2. Not offensive: at this point, we do not have the bandwidth to moderate overtly political discussions. Assume best intent and be excellent to each other.
  3. Not regarding using or support for Lemmy: context, see the list of support communities and tools for finding communities below
  4. Not ad nauseam inducing: please make sure it is a question that would be new to most members
  5. An actual topic of discussion

Looking for support?

Looking for a community?

~Icon~ ~by~ ~@Double_[email protected]~

founded 5 years ago
MODERATORS
 

I have a gate mounted to a 6x8 post where the center has rotted out of the post. I am looking to fill the center of the post, rather then replace it if I could. The post itself is still solid, just hollow so the mount bolt have nothing to connect to anymore. I am thinking to try the expanding post foam inside the post, but have not worked with it and I have no reference if it would be stong enough to hold a bolt.

you are viewing a single comment's thread
view the rest of the comments
[โ€“] Tylerdurdon 2 points 1 year ago (1 children)

The thing about the expanding foam is it may force you to get a new post anyway.

When that stuff expands, it can push cracks apart and if you have enough hollow in that center, it may be enough to provide decent compression power to the foam.

On the positive side, the foam will keep water from going in there, which is causing/exacerbating the damage.

Will foam provide support? Marginally. Bolts won't get much added strength, but the entire post may flex a tiny bit less, assuming it doesn't split during the curing period.

Silicone may work better, but I'm betting the quantity needed would surpass the cost of having someone replace it all.

You won't be out much if it doesn't work, but if it does end up splitting the wood, you may want to be prepared to replace it.

[โ€“] Retix 3 points 1 year ago

Most of the expanding foams are not waterproof or water resistant. You have to paint or caulk over them to prevent them from absorbing the water